Various types of pressure gauges meet different requirements. The following explanation is correctLABOMThe evaluation and delegation of the table are helpful.
Requirements and Testing
The requirements and testing for overvoltage measuring devices are listed in DIN 16005. Therefore, there is no need to sign a valid agreement with the user, and the LABOM form meets all the conditions specified in the above standards.
Shell model
For different security requirements,LABOMPressure gauges offer a range of housing types. The requirements for the housing of the spring tube measurement system are listed in DIN 16006 and DIN 16007.LABOM, GermanyThese requirements will also be applied in the diaphragm measurement system. Considering the usage conditions, users can choose the appropriate model.
temperature error
The general error range of overpressure pressure gauges is specified in DIN 16005 and is suitable for different accuracy levels. These technical requirements refer to the consideration of additional errors in temperature effects when the reference temperature is 20 ℃ (standard value):
a) The impact of sensitivity is about 0.3%/10K
b) Indicator error in liquid filling standard device
-For DIN 16006-6 mbar/10K
-For DIN 16007-10 mbar/10K
It is caused by the internal pressure compensation diaphragm generated by the device protection type IP66, and is within the normal application range of -20...+50 ℃.