Precautions for Danfoss temperature transmitter
　　
The power supply of the temperature transmitter must not have spikes, otherwise it is easy to damage the transmitter. The calibration of the transmitter should be carried out 5 minutes after power on, and attention should be paid to the ambient temperature at that time. When measuring high temperatures (>>100 ℃), the sensor chamber and junction box should be isolated with filling materials to prevent the junction box from overheating and burning out the transmitter When using sensors with severe interference, the housing should be firmly grounded to avoid interference The power and signal output should be transmitted using a shielded cable with a diameter of 10, and the crimping nut should be tightened to ensure airtightness.