Recently, Shanghai Shenggao Electric Technology Co., Ltd. issued a notice on carrying out the quality assessment of lightning protection device testing in 2022, deploying the quality assessment of lightning protection testing in 2022.

1、 Assessment object:

All departments and units of Shanghai Shenggao Electric Technology Co., Ltd.

2、 Assessment time:

From October 20th to November 20th, 2022.

3、 Assessment method:

1. Shanghai Shenggao Electric Technology Co., Ltd. entrusts a lightning protection device testing agency to be specifically responsible for the implementation of lightning protection device testing quality assessment. The assessment list is attached (Attachment 1), and each assessed unit should cooperate with relevant work.

2. The assessment agency shall conduct random inspections on the testing projects completed by the assessed units within the area of Shanghai Shenggao Electric Technology Co., Ltd. in 2022. The sampling ratio for each assessed unit's testing projects shall be 5%, with no more than 10 items.

3. The assessment methods are divided into data inspection and project verification. Among them, the assessment based on the project verification method should not be less than 50% of the sampled items, and two or fewer items should be verified by project verification.

4. Other assessment technical requirements shall refer to the "General Rules for Quality Assessment of Lightning Protection Device Testing" (Attachment 2).

4、 Assessment content:

1. Check whether the assessed unit has the qualifications of a legislative body.

2. Check whether the number of technical personnel in the assessed unit meets the qualification level requirements.

3. Check whether the instruments and equipment of the assessed unit are within the valid period of calibration.

4. Verify the degree to which the detection report reflects the true situation of lightning protection devices and related buildings (structures).

5. Evaluate the accuracy of the testing method.

6. Check the completeness of the testing items stated in the testing report.

7. Check the applicability of the standards used for testing.

8. Verify the accuracy of the detection data.

9. Check the consistency between the inspection report and the original records.

10. Check the correctness of the comprehensive conclusion of the inspection report and the rationality of the improvement suggestions.

11. Check whether the assessed unit has carried out testing beyond its qualification level.

5、 Other requirements:

After each project assessment is completed, the assessment agency shall truthfully fill in three copies of the "Assessment Report" (Attachment 3), and the assessed unit shall keep one copy as the basis for qualification extension and upgrading; The assessment agency shall keep one copy and report one copy to the Provincial Meteorological Bureau. Both parties involved in the assessment must have sufficient communication regarding the assessment situation, and the assessed unit must truthfully fill in the "agree" or "disagree" assessment conclusion in the opinion column, with the legal representative of the assessed unit signing and affixing the unit seal.

2. After each assessed unit completes the assessment, the assessment institution shall fill out the "Statistical Table of Lightning Protection Device Testing Quality Assessment" (Attachment 4), and submit all assessed units' "Statistical Table of Lightning Protection Device Testing Quality Assessment" and all assessed items' "Assessment Reports" in hard copy to the Regulations Department of the Provincial Meteorological Bureau before October 20, 2022.

3. No fees will be charged for the quality assessment of lightning protection device testing.

4. When providing relevant information, each assessed department and unit must ensure the authenticity of the information and keep it consistent with the annual report. If any fraudulent behavior is found, it will be recorded in the credit file and dealt with seriously in accordance with relevant regulations.