Metal rotor flowmeterIt consists of two components, one of which is a conical tube that gradually expands from bottom to top; The other component of the rotor flowmeter is a rotor that is placed in a conical tube and can move freely along the centerline of the tube. When measuring the flow rate of a fluid with a rotor flowmeter, the measured fluid flows in from the lower end of the conical tube, and the flow of the fluid impacts the rotor, generating a force on it (the magnitude of this force varies with the flow rate); When the flow rate is large enough, the force generated lifts the rotor and raises it. The metal rotor flowmeter has the characteristics of simple structure, reliable operation, wide applicability, high accuracy, and easy installation. It has the characteristics of high pressure resistance, high temperature resistance, strong sense of safety, and concise reading, and can be applied to flow measurement of opaque and corrosive media.
Metal rotor flowmeterKey Features:
1. Suitable for small diameters and low flow rates
2. Reliable work, minimal maintenance, and long lifespan
3. Low requirements for downstream straight pipe sections
4. Has a wide flow range of 10:1
5. Local pointer indication is close to linear
6. The intelligent indicator is equipped with an LCD display, which can display instantaneous and cumulative flow rates, as well as output pulses and alarms
7. Equipped with temperature compensation
8. There are various forms such as on-site type, remote transmission type, jacket type, explosion-proof, corrosion-resistant, etc
The metal rotor flowmeter industry must be transformed. Currently, it is a period of technological transformation, and the country has adopted preferential policies to support technological transformation. Bank loan interest rates are very low, and raw material prices are still at rock bottom. Therefore, it is currently the period with the lowest investment costs. The impact of China's accession to the WTO on the metal rotor flowmeter industry is greater in terms of favorable factors than unfavorable factors. We should seize favorable opportunities, develop and strengthen ourselves through technological transformation, and expand both domestically and internationally.
Metal rotor flowmeter is a commonly used variable area flow measurement instrument in industrial automation process control. It has the characteristics of small size, large detection range, and easy use.Metal rotor flowmeterIt can be used to measure the flow rate of liquids, gases, and vapors, especially suitable for measuring the flow rate of low velocity and low flow media.