review
Basic characteristics
application
ULTRAMAT 23 gas analyzer can measure four gas components at once: multiple
Can measure three types of infrared sensitive gases, such as CO, CO2 , NO, SO2 , CH4 and
Measure O using an electrochemical oxygen measurement unit2.
ULTRAMAT 23 basic types can be:
• Measurement of oxygen content in an infrared gas composition with (or without) band
• Measurement of oxygen content in two infrared gas components with (or without) bands
• Measurement of oxygen content in three infrared gas components with (or without) bands
For biogas applications, continuous measurement of four components. Measure two types of infrared gas components
（CO2And CH4）Add electrochemical oxygen or hydrogen sulfide measurement
Continuous measurement of four components with paramagnetic oxygen application. Measure three infrared gas components
Oxygen measurement using paramagnetic oxygen principle (not applicable for emission monitoring)
• Automatic calibration using ambient air: oxygen content calibration and zero point calibration of infrared components
It depends on the tested component
Multi layer detection ensures high accuracy and eliminates infrared cross interference
The sampling unit is easy to clean, reducing maintenance costs
• Menu assisted operation with simple text format, simple and easy to understand
• Maintenance information and record manual, preventive maintenance, can assist maintenance and upkeep personnel,
reduce costs
Open interface structure (RS 485, RS 232, PROFIBUS, SIPROM GA); Easy
Integration and Remote Control
Characteristics in the application of biogas
Continuous measurement of four components, including hydrogen sulfide
A long-lasting hydrogen sulfide sensor that is not affected by an increase in hydrogen sulfide concentration and does not require
Dilution and Backblowing
• Suitable for combustible gas applications
Application field
Optimization of Operation for Small Combustion Systems
Monitor combustion systems using all types of fuels (oil, gas, and coal)
Their exhaust emission concentration; It can also monitor the operation and detection of thermal incineration plants
• Monitor indoor air quality
Monitor the air conditions in fruit storage rooms, greenhouses, cellars, and warehouses
• Monitor the process and control various functions
Monitor environmental conditions during the heat treatment process of steel
• Used in environments without potential explosion hazards
Biogas field
• Monitor biogas fermentation production
• Monitor gas pressurization
• Monitor biological feed
Application field of paramagnetic oxygen
• Inert gas device
• Monitor indoor air quality
• Pharmaceutical Engineering
More applications
• Environmental protection
Chemical factory
• Cement industry
special application
ULTRAMAT 23 gas analyzer equipped with two IR components and without a pump
Can be equipped with two independent air circuits. In this way, it can measure two sampling points simultaneously,
This measurement method can be used to measure, for example: before and after the conversion of NOx converter
NOx content.
ULTRAMAT 23 gas analyzer can be applied to flue gas emission monitoring systems and
Process and safety monitoring.
The ULTRAMAT 23 gas analyzer certified by T Ü V can be used according to 13
The requirements for measuring CO, NO, and SO in BlmSCHV and TA Luft2 And O2
Small allowable range certified by T Ü V:
Single component and two-component analyzers
- CO：0 ~ 150 mg/m3
- NO：0 ~ 250 mg/m3
- SO2：0 ~ 200 mg/m3
Three component analyzer
- CO：0 ~ 250 mg/m3
- NO：0 ~ 400 mg/m3
- SO2：0 ~ 200 mg/m3
All ranges larger than the above are also allowed.