Product Introduction

Chinese desktop copper ion analyzerIt is an instrument used for measuring copper ions in aqueous solutions for analysis. It is suitable for desktop analysis and monitoring of copper ions in steam water systems in thermal power plants, as well as for copper ion analysis in other industries such as environmental monitoring and chemical engineering.

The whole set of instruments consists of a Chinese desktop copper ion analyzer and a built-in measuring water circuit.

Features

1. Full Chinese display, user-friendly interface: using high-resolution LCD display module, all data, status and operation steps are displayed in Chinese characters, without any symbols or codes defined by the manufacturer. It can be used without an instruction manual.

2. Simple menu structure: Compared with traditional instruments, the functions have increased significantly. However, due to the use of categorized menu structures and microcomputer like operation methods, it is more convenient to use!

3. Text based human-machine dialogue: Users do not need to memorize the operation steps and sequence, and can use it without instructions.

4. Data storage and query: The meter stores 3000 measurement data, which can be queried by time.

5. Two calibration methods: In addition to the traditional multi-point calibration method, there is also a manual input coefficient calibration method to meet the needs of various situations.

6. Notepad function: faithfully record the operation and usage of the instrument for easy management.

7. Backlight function: It can be used in dimly lit or low light environments, automatically adjusting the contrast according to temperature changes, or manually adjusting to suit personal habits.

technical indicators

Measurement range: 0-50 μ g/L or 0-200 μ g/L

Resolution: 0.1 μ g/L

Basic error: ± 3% F.S

Repetitive error: ± 3% F.S

Stability: ± 2% F.S/24h

Tested water sample: 0-60 ℃

Clock accuracy: ± 1 minute/month

Data storage quantity: 3000 points

Continuous data retention time in case of power failure:>5 years

Working conditions: Environmental temperature: 0-60 ℃ Relative humidity:<85%

Power supply: 220V ± 10% 50 ± 1 Hz

Dimensions: 310 × 210 × 100mm in length, width, and height

Sample requirements

Before conducting the test, the waterway should be carefully flushed to remove any possible contaminants.

The sample must be representative of the manufacturing process. The temperature must be between 15 ℃ and 35 ℃, and stable within ± 3 ℃.