The bag leak detector plays a crucial role in ensuring the normal operation of the bag dust removal system, and proper maintenance procedures can guarantee its high-precision detection and long-term stable operation. Below is a detailed introduction to its maintenance process for you.

1、 Daily maintenance

After daily work, the dust filter should be cleaned, especially with regards toBag leak detectorEquipped with sampling ports and sensors to prevent dust accumulation from affecting detection accuracy. Check the appearance of the equipment for any damage or abnormalities, including whether the wiring connections are tight and whether the instrument casing is clean. At the same time, check the various parameters on the instrument display screen to ensure that the indications are normal. If there are any abnormal values, record and analyze the reasons in a timely manner.

2、 Regular (weekly/monthly) maintenance

Weekly or monthly, a more in-depth inspection of the instruments is required. Firstly, clean the interior of the instrument, removing accumulated dust and debris to avoid affecting its performance. Soft brushes or specialized cleaning agents can be used for cleaning, but care should be taken to avoid liquids entering the interior of the instrument.

Then, check the smoothness of the sampling system, regularly replace the sampling filter paper, ensure that the resistance of the sampling system is within the specified range, and prevent inaccurate sampling caused by filter paper blockage. In addition, the calibration of the leak detector should be checked regularly. If there is any deviation, it should be calibrated in a timely manner. According to the calibration procedure of the equipment, standard dust can be used for calibration operation to ensure the accuracy of the measurement results.

3、 Long term (seasonal/annual) maintenance

Every quarter or six months, the electrical system of the instrument should be inspected, including circuits, plugs, and fuses, to check for any looseness, aging, or damage. If necessary, it should be replaced in a timely manner. At the same time, check the operating status of the pump, including pressure, flow rate, etc. If any abnormal operation of the pump is found, it should be repaired or replaced in a timely manner.

Every year, yesBag leak detectorConduct comprehensive functional checks and performance testing, such as conducting multiple leak tests at different concentrations and operating conditions, simulating various actual working conditions, to ensure that the instrument can work accurately in different environments. Through a comprehensive maintenance process, the service life of the bag leak detector can be effectively extended, ensuring the reliability of the detection results.