ATS-100MThe silicon steel sheet iron loss measuring instrument is based on the national standardGB/T13789-92 Chinese of measure quantity square law ， pick use single piece machine control manufacture skill Technique and A/D、 D/A phase knot combine, synthesize ， inside place positive string wave Li magnet electricity source ， measure try knotThe fruit is displayed directly.

【 Main Features 】

●Suitable for measuring cold-rolled oriented, non oriented, and hot-rolled silicon steel sheets of various thicknessesIron damage

The test results do not include copper loss and are a true measurement of iron loss

● Maintain sinusoidal magnetic flux to effectively eliminate harmonic effects

The test probe has been added with air magnetic flux compensation

Technical indicators

●Communication, Insurance: 1A

● Display header: 4 bit LED digital display

Test frequency: 50Hz, 60Hz free choice

Magnetic induction setting range: Bs1:0.5-1.0T, Bs2:1.0-1.5T, Bs3:1.5-1.9T

Thickness setting range: 0.10-0.50mm

● Size requirements for silicon steel sheets: ≥ 50mm × 50mm, with a smooth surface

Test repeatability: ± 1?

●(Test results converted from square circle samples to square circles)

● Display refresh rate: 6 times

● Operating environment: temperature -10 ° C to 40 ° C, humidity: 35 to 75 ° C?

ATS-100MThe accuracy of the silicon steel sheet iron loss measuring instrument is based on the standard sizeAfter calibrating the square circle standard sample in the square circle, it is obtained by testing the square circle standard sample. In actual use, users can compare and measure silicon steel sheets with known performance as standard samplesTest the performance of the tested silicon steel sheet. As an instrument for rapid measurement of iron loss in silicon steel sheets,The repeatability can meet the user's judgment of the performance of silicon steel sheets, but itsThe test results cannot serve as a legal basis. If more rigorous data is needed,Please choose the measurement method for Epstein Square Circle, such as the one produced by our companyMATS-2010M Silicon steel transformer measuring device.