Multi channel temperature inspection instrument(LEDDisplay type)FLE5000(8 16 24 32)

1The multi-channel temperature tester can set parameters and select any measurement channel from 1 to 32

2When the object being tested is charged,Can conduct live testing（Isolation voltage AC400V）Safe and reliable.

3Between channelsscanning speedCan be set (100ms, 200ms, 500ms, 1000ms, 2000ms);

4, can be setAll channels have temperature upper and lower limit alarm channels；

5It can also be equipped with an alarm and signal output to control the temperature rise or fall, ensuring the normal operation of the tested product.

6、The same instrument can use TTheJTheKThermocouples meet testing requirements for different temperature ranges;

J : -50.0～760.0℃K : 0.0～1370.0℃T : -200.0～400.0℃

7There are two measurement methods to choose from: inspection and fixed-point measurement;

8After power failure, the set data has a memory retention function and can also restore the factory settings function in the settings;

9、Thermocouple disconnection has automatic functionDetection function；

10Uneven degree of each channel: 0.5 degrees, instrument resolution of 0.1 degrees, measurement accuracy better than level 0.5;

11Equipped with communication interface (RS232 or 485), optional printer LPT interface (can set printing time interval);

12、 FLE5008W, FLE5016W, FLE5024W, and FLE5032W all have front panels withmini printerCan print temperature data on site;

13、Select computer system software to collect temperature data, draw temperature curves, and save the temperature data curves to the computer;

14Chassis:230(Width) 118 (Height) 260 (Depth) (mm); Cabinet opening size: 226 (width), 114 (height), 260 (depth) (mm)

15Weight approximately 3Kg