Mobile touch screen click and line life testing machine
Function introduction of touch screen marking life testing machine:
Welcome to use the touch screen marking life testing machine!
This testing machine is used for writing and tapping life testing of touch screens. The machine adopts a CNC mechanical structure to drive the counterweight
The weight generates a standard constant pressure, which is used to simulate the product for write life testing. Users can use incremental write times
Using a multimeter to measure the resistance value for analysis, this analysis can obtain the variation curve, special variation, and life cycle of the tested product,
Alternatively, the testing head can be replaced with a pencil from Zhonghua HB for hardness testing of the product's casing, which includes testing for adhesive hardness
Test, surface paint hardness test, paint adhesion test. The machine is equipped with optional dual head pressure, adjustable speed, and stroke
Adjustable and adjustable stop count functions are the "good" machines for your company's testing department.
1、 Precautions before installation:
The touch screen marking life testing machine must be placed on a horizontal surface.
A certain amount of space must be reserved around the touch screen marking life testing machine.
2、 Assembly and connection:
Power cord: Insert the power cord into a three pin socket with 220 volts, 3A rating, and reliable grounding.
3、 Set the marking range
According to the display function on the screen, press the function key in the touch function key area to enter the main screen and enter the settings of each item
Sure, it's very convenient!
1. Manual screen: You can simulate the operation of the machine and measure the size of the screen to be measured by hand
2. Test screen: Observation of the screen during testing
3. Set screen speed

4. Monitoring screen: When the machine malfunctions or has an alarm, it will be displayed on this screen
4、 Technical indicators:
1. Workbench size: 600mm × 300mm
2. Travel range: 10mm-150mm (using input to set reciprocating distance)
3. Test power: stepper motor
4. Test head: Standard test pen
5. Movement mode: Stepper motor drives reciprocating motion
6. Test speed range: 0-200mm/s (depending on requirements)
7. Pressure: 250g can be weighted (weight)
8. Count 6 digits, power down memory
5、 Maintenance and repair:
1. The material used for the countertop of this machine is non broken glue, and any adhesive residue adhering to the countertop should be removed after each use
Do not use hard objects to wipe the residue. Use strong adhesive tape to remove it, or use WD-40 dissolution for wiping. To maintain this
Do not use any organic solvents to wipe the outer shell and surface of the machine, otherwise it will cause damage
Paint peeling off on the surface and oxidation on the countertop.
When assembling weights, it is not advisable to have more than three weights stacked one after another, otherwise excessive swinging may cause measurement deviation.
3. The internal machine mechanism belongs to lubrication and does not require maintenance. If any problems arise, please contact the manufacturer

Peng