-
E-mail
524967894@qq.com
-
Phone
18602647037
-
Address
Boai Technology Park, Intersection of Changjiang Road and Miyun Road, Nankai District, Tianjin
Tianjin Klerui Technology Co., Ltd
524967894@qq.com
18602647037
Boai Technology Park, Intersection of Changjiang Road and Miyun Road, Nankai District, Tianjin
Below are the characteristics of our company's new generation Hart version differential pressure transmitter. We welcome friends to discuss and purchase
hartDifferential pressure transmitterProduct Overview:
hartThe differential pressure transmitter adopts domestic structural advantages and a two-wire signal output method, which can replace traditional ones1151TheCECCWaiting for a series of products. In order to adapt to the continuous improvement and development of domestic automation level, this series of products not only has a compact and exquisite design, but also introduces products withHARTThe intelligent function of fieldbus protocol.
hartThe differential pressure transmitter is mainly a primary instrument for measuring the liquid level, density, and pressure of liquids, gases, and vapors. It converts the output into4-20mAThe current signal output. You can also use our company'shartHand operated devices communicate with each other to set range parameters.
hartDifferential pressure transmitterProduct Features:
High measurement accuracy, adjustable range and zero point on-site
Good job stability and performance, suitable for pressure, differential pressure, liquid level, and flow measurement.
Two line system, no mechanical movable parts, low maintenance volume.
The sensor contact membrane material is optional and can be used for strongly corrosive or highly toxic media.
There are many installation and connection methods, which are convenient for compatibility with other products and achieve optimal measurement.
Standard signal4-20mAOutput, withHARTThe digital signal of the protocol, remote control, supports upgrading to fieldbus and field control based technologies.
Measure viscous and easily crystallizable media at high temperatures, as well as precipitating media with solid particles or suspended solids.
hartDifferential pressure transmitterTechnical Specifications:
Measurement range: used for pressure, differential pressure, liquid level, and flow measurement
Numerical accuracy:+（-）0.05%
Simulation accuracy:+（-）0.75%+（-）0.1%F.S
Full performance:+（-）0.25F. S
Stability:0.25% 60month
Range ratio:100：1
Measurement rate:0.2S
Miniaturization（2.4kg）All stainless steel flange, easy to install
Process connectivity is compatible with other products to achieve optimal measurement
Up * adoptedHThe sensor with alloy sheath achieves excellent cold and hot stability
adopt16Intelligent transmitter for computers
standard4-20mA, based onHARTDigital signal of protocol, remote control
hartDifferential pressure transmitterProduct selection:
model |
generation code |
say bright |
1151/3351/1151/3851DP |
hartDifferential pressure transmitter |
|
output signal |
-E -D |
4～20mA,HARTProtocol based digital communication 4～20mA |
|
Measurement range (Membrane box) |
L M H V |
0.5～10Kpa｛50～1000mmH2O｝ 0.5～10Kpa｛50～1000mmH2O｝ 0.5～10Kpa｛50～1000mmH2O｝ 0.5～10Kpa｛50～1000mmH2O｝ |
Material of the liquid receiving part |
S H M TA D B |
[ontology] [Membrane box] [exhaust screw] SCS14A SUS316L SUS316 SCS14AHastelloyC-276 SUS316 SCS14AMonelSUS316 SCS14ATantalumSUS316 HastelloyC-276HastelloyC-276HastelloyC-276 HastelloyC-276Tantalum HastelloyC-276 Monel Monel Monel |
pipeline connection |
0 1 2 3 4 5 |
No process joints(On the flange of the chamberRcl/4internal thread) beltRcl/4Internal thread process connector beltRcl/2Internal thread process connector belt1/4NPTInternal thread process joint belt1/2NPTInternal thread process joint No process joints(On the flange of the chamber1/4NPTinternal thread) |
Material of bolts and nuts |
A B C |
[Great work pressure] LMembrane boxLTheMTheHTheVMembrane box SCM435 3.5Mpa 16Mpa SUS630 3.5Mpa 16Mpa SUH660 3.5Mpa 16Mpa |
Installation method |
-2 -3 -6 -7 -8 -9 |
Vertical installation, high voltage on the right, process connector on top Vertical installation, high voltage on the right, process connector at the bottom Vertical installation, high voltage on the left, process connector on top Vertical installation, high voltage on the left, process connector at the bottom Horizontal installation, high voltage on the right side Horizontal installation, high pressure on the left side |
electrical interface |
0 2 3 4 5 7 8 9 |
G1/2Internal thread,1Wire connection port 1/2NPTInternal thread,2Wire connection port Pg13.5Internal thread,2Wire connection port M20Internal thread,2Wire connection port G1/2Internal thread,2The wiring port is equipped with a blind plug 1/2NPTInternal thread, with two electrical interfaces and a blind plug Pg13.5Internal thread, with two electrical interfaces and a blind plug M20Internal thread, with two electrical interfaces and a blind plug |
Display header |
D E N |
Digital header Digital header with setting button (No header) |
2-inchPipe installation bracket |
A B C D N |
SECCFlat bracket SUS304Flat bracket SECC LType bracket SUS304 LType bracket No installation bracket |
Additional selection code |
/□Selection specifications |
|
The new generation Hart version intelligent differential pressure transmitter has been launched, with stable and reliable performance