The liquid medium used to measure conductivity requires a conductivity greater than 5 μ s/cm (the conductivity of tap water and raw water is about 100-5000 μ s/cm, which can be used to measure the flow rate of various acid, alkali, salt solutions, mud, slurry, pulp and other media, but the medium cannot contain a lot of iron filings, ferromagnetic substances and a large number of bubbles. It is mainly used in industries such as petrochemicals, steel, electricity, metallurgy, textiles, food, pharmaceuticals, papermaking, as well as municipal environmental protection, water conservancy and other fields.

The main components of the split type electromagnetic flowmeter sensor are: measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. Mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. The flowmeter is a bidirectional measurement system equipped with three integrators: forward total, reverse total, and differential total; Can display. Zhuang, reverse flow, and have multiple outputs: current, pulse, digital communication HART。

　　Manufacturer of split type electromagnetic flowmeterProduct Features:

1. Suitable for volumetric flow measurement of conductive fluids with conductivity greater than 5 ц s/cm;

2. There are no active or obstructed components inside the measuring tube, and the pressure loss is small;

3. Lining and electrodes with different materials have good anti-corrosion performance;

4. Not affected by medium, density, viscosity, temperature, pressure, and conductivity.

The measurement principle of split type electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. The split type electromagnetic flowmeter consists of a sensor and a converter. The sensor is installed on the measurement pipeline, and the converter is installed within 30 meters or 100 meters from the sensor. The two are connected by a shielded cable.