Instructions for using the temperature measurement and facial recognition all-in-one machine

Version:V3.0

1、 Equipment hardware connection instructions

1.1 Interface diagram

1.2terminalinterfacefunctiondefinition

interfaceserial number	pin(Pin)	interfacename	Functional indicators
1 (Power interface)	/	power supply	12VDC
2 （USBInterface)	/	USB	USB 2.0/3.0interface
3 (Network interface)	/	Ethernet port	RJ45network interface
4 (Switch interface)	+	Alarm-NO	NONormally open port
	-	Alarm-NO	COMcommon terminal
5 (Weigen interface)	1	VCC	12VDC
	2	Wiegand_D1	WiegandProtocol data portD1
	3	Wiegand_D0	Wigan Protocol Data PortD0
	4	GND	signal ground

2、 Device Connection

1Connect the device network port toPCcomputer;

2Connect the normally open and common terminals of the switch to the access control switch;

3Device connection, power on waiting15In seconds, the screen lights up and the device starts up normally.

3、 EquipmentIPsearch

Power on the device1After minutes, open the search tool【IPWIzaid 2.2.5】Click the [Search] button to display the deviceIPAddress.

Note:By default, the device'sIPAddress is192.168.1.18.

4、 Instructions for using facial matching software

All operations of the device's facial database are performed through facial matching demonstration softwareV1.0.8The interface description for processing is as follows:

1、equipmentIPAddress input box:Enter the device previously searched forIP.

2、Device connection/Disconnect button:After clicking on the connection device, control the connection and disconnection status between the device and the facial matching demonstration software. Click on 'Connect Device' to preview the real-time video. Click on 'Disconnect Device' to close the preview,

3、Identification matching result information display window:When the captured face matches the face database in the device, it will be displayed here, and information such as face recognition similarity and temperature can be displayed. If there is no matching information in the face database, it will not be displayed.

4、List of facial snapshot images:Real time display of all faces captured by the device.

5、Reserved settings button:The function has not been defined yet, and software settings will be added in the future.

6、Facial parameter configuration:The key parameters for facial capture can be set as follows.

6.1Time interval for capturing facial images:Set the time interval for facial capture to avoid repeated capture of images in a short period of time

6.2Live threshold for facial recognition:Set the live threshold for facial recognition,0-1The larger the value, the stricter and safer the live recognition detection.

6.3Parameter settings for capturing images:Set up the capture of images,0zuiPoor,1zuiOkay.

6.4Score threshold for facial recognition:Set the threshold for facial recognition matching, compare the captured facial image with the facial database, and if the similarity exceeds this threshold, it will be recognized as the same person. It is recommended to set the threshold at70Above, the larger the matching similarity, the higher the requirement and the safer it is

6.5Capture image blur parameter:Set the clarity and range of captured images0-1The smaller the value, the clearer it is.

6.6Threshold for the number of times the same person is recognized:Set the number of times the face is repeatedly recognized within the camera's recognition range. If it is not recognized again after the number of times, it needs to exit the camera's field of view and re-enter the frame before it can continue to be recognized.

7Log: Display the history of facial recognition logs.

8、Facial management:The functions of adding, importing, modifying, and deleting facial databases.

8.1Manually adding faces to the facial database:Click [add】Button, enter the face input interface, face the camera, click【capture images】Button, indicating successful capture of facial image, enter facial information, click【Confirm input】Button, indicating that the formal facial recognition has been successfully entered

8.2Delete all face databases:Click [Delete all】Click the button to delete all face databases, and a prompt will appear indicating successful deletion. The prompt box for confirming whether to delete has not been repeated yet, and caution should be exercised when operating

8.3Importing a single face database:Click [single import】Button, pop up the face input interface, click【Select image】Select the facial image file, enter facial information, and click【Confirm input】You can complete the import of a single face.

8.4Batch import of facial database:Click [Batch Import】Button, pop up the interface for batch importing faces. Click [Select Directory】Button, select the folder where the face image is located, and click【Start importing】Once the import progress bar is completed, the batch import of faces operation is completed.

8.5Refresh the facial database:Click [refresh】Button to refresh and query facial database information, allowing you to view the statistics of the number of entered faces.

8.6Manually synchronize facial database:Click [manual sync】Button,Manually synchronize the facial database in the facial recognition device with the facial database in the demonstration software to avoid inconsistency between the facial matching software's facial database and the device's facial database after device replacement, resulting in incorrect display of recognition comparison information. After replacing the new device, it is necessary to manually synchronize the facial database first.

5、 Facial comparison results

1When a person who has been entered into the whitelist appears in front of the screen, the device will automatically capture and compare them with the face database. If the comparison is successful, the personnel information will be displayed on the screen and voice broadcast will be made【XXVerified as passed, and can be linked with a relay to close and open the circuit;

2Face not entered, comparison failed, face capture box is red, voice broadcast [unauthorized].