The Vaisala DRYCAP â DMP80 series handheld dew point and temperature probes are designed for portable use and are suitable for Indigo80 handheld display heads. The combination of DMP80 probe and Indigo80 is suitable for spot checking and on-site calibration of installed Vaisala humidity meters.

Product Features

Portable design optimized for industrial spot checks and on-site calibration

Dew point measurement accuracy up to ± 2 ° C Td/f

Wide dew point measurement range

The sensor clearing function improves long-term stability and chemical tolerance

• Condensation resistance

• Compatible with Indigo80 handheld display head, Indigo data processing unit, and InsightPC software

Attached is the calibration certificate issued by Vaisala

Reliable measurement using Vaisala DRYCAP sensors

The Vaisala DRYCAP sensor is not affected by particulate pollution, water condensation, oil vapor, and most chemicals. The sensor is resistant to condensation and can resume normal operation even when exposed to liquid water. Due to its fast response time and stability, this sensor performs well in dynamic and low dew point applications.

This probe can be directly inserted into the pressurized process and can quickly respond when transitioning from the external environment to the process environment conditions. The DMP80 probe is suitable for direct measurement of process dew point over a wide temperature and pressure range.

The DMP80 series probe comes with a standard factory calibration certificate and can choose an approved calibration. Therefore, the probe can be used as a reference standard for on-site calibration.

The sensor cleaning function can reduce the impact of pollutants

In environments with high concentrations of chemicals and cleaning agents, choosing instruments with sensor clearing capabilities can help maintain measurement accuracy during calibration cycles.

The sensor clearing function is used to briefly heat the sensor to remove chemicals that may reduce measurement performance and cause drift.

Reliable handheld measurement design

The design of the probe handle has been optimized for manual operation in various measurement environments. The IP67 probe handle comes with a probe connection cable, providing good moisture and dust protection. The stable design of the handle can also protect cable connections from mechanical stress.

Flexible connection methods

The DMP80 probe has been optimized and can be used in conjunction with the Indigo80 handheld display head to perform portable spot checks, on-site calibration, and data recording. They can also be connected to Indigo data processing units.

The DMP80 probe can be connected to the Vaisala Insight software for Windows, making it easy for you to access device analysis and configuration.