pt100If the platinum resistance temperature sensor is not installed correctly during the installation process, it is easy to encounter certain faults, which can easily affect the work efficiency during use. Today we will discuss itPT100The correct installation method for platinum resistance temperature sensors.

1For the selection of installation environment, we need to choose representative locations, such as areas with high temperature and humidity changes. In addition, we must stay away from strong magnetic fields, places with frequent vibrations, temperature blind spots, and one thing to pay attention to, try not to letPT100The platinum thermoelectric temperature sensor touches the inside of the container of the measured object, which will affect the measurement accuracy.

2If it needs to be inserted into the soil, the insertion depth must be accurately calculated, and the minimum insertion depth should not be less than the diameter of the temperature sensor protective sleeve8-10Twice.

3According to the environment, choose the placement angle. If it is a normal situation, it is best to choose a vertical placement to effectively preventPT100The deformation of platinum resistance temperature sensors occurs at high temperatures. If placed in a place with water flow, the sensor should be tilted and generally maintained at30Degree to45It is advisable to place it horizontally in certain special environments, and a support frame must be installed. In addition, the outlet holes of the junction box should be facing downwards to prevent water vapor and dirt from falling into the junction box.

The above is only about how to install correctlyPT100The simple handling of temperature sensors requires attention when reinstallingPT100The installation position of the temperature sensor of the temperature sensing rod should be installed as vertically as possible to prevent deformation under high temperature. However, in the case of flow velocity, it must be installed at an angle opposite to the flow velocity (generally inclined)45°)It is best to choose the bend of the pipeline,PT100The effective working part of the temperature probe should be located in the middle of the fluid. When horizontal installation is required, support brackets should be added if necessary. The outlet holes of the temperature sensor junction box for tilt and water installation should be downward to prevent water vapor and dirt from falling into the junction box.

The above are somept100The normal installation method for platinum resistance temperature sensors, more types of PT100/PT1000 temperature sensors can be contacted at any time.