Digital dual-phase voltammetry table clampIt is a portable instrument with multiple power measurement functions. The biggest feature of this table is that it can measure the phase and power frequency between two voltages, two currents, and between voltage and current.

　　

The digital dual clamp phase volt ampere meter can conveniently measure the phase between U-U, I-I, and U-I on site, distinguish the phase sequence of inductive and capacitive circuits and three-phase voltages, detect the wiring group of transformers, test the secondary circuit and bus differential protection system, read out the phase relationship between the CT of each differential protection group, and check the correctness of the wiring of the electricity meter.

　　

　　Digital dual-phase voltammetry table clampFeatures:

　　

1. Exquisite structure, easy to use

　　

Handheld structure;

　　

When measuring phase within the current range of 10mA-10A and voltage range of 3V-500V, there is no need to disconnect the circuit or replace the limit;

　　

This digital dual clamp phase volt ampere meter display adopts a high contrast LCD screen with a word height of up to 25mm, and the screen angle can be freely converted by about 70 ° to achieve * visual effect;

　　

The switch function and layout are reasonable, and rotating the switch can read the measured voltage, current, and phase.

　　

2. High resolution

　　

The YTC2220 digital dual clamp phase voltmeter adopts a type current clamp, with a current resolution of 0.1mA and a voltage resolution of 0.1V.

　　

3. Low power consumption

　　

This digital dual clamp phase voltmeter is designed with micro power consumption and has battery voltage detection function