-
E-mail
zzcc8162@zzgwsit.cn
- Phone
-
Address
1119 Science Avenue, Shangjie District, Zhengzhou City
Zhengzhou Changcheng Technology Industry and Trade Co., Ltd
zzcc8162@zzgwsit.cn
1119 Science Avenue, Shangjie District, Zhengzhou City
GR-150ExTechnical parameters of explosion-proof double-layer glass reactor
150L speed regulating double-layer glass reactorMainly used for material synthesis reactions, by injecting into the interlayer of the reaction vesseloneCirculating liquid at a constant temperature to allow the materials inside the kettle to react at the desired temperature.
The kettle can be evacuated as needed to allow the material to react under negative pressure. By adjusting the regulating valve on the outlet pipe of the constant pressure funnel, the uniform dripping of materials can be controlled. The heat exchange function of the condenser can be used to distill and recover the reaction products.
150L speed regulating double-layer glass reactorproduceProduct Technical Features
●All glass components are made of high borosilicate glass3.3Has excellent physical and chemical properties.
●Can withstand high temperatures(200℃)To low temperature(-80℃)Used within the scope.
●can be-0.1 MPa~0.0 MPa pressureWork under conditions.
●Connect stainless steel insulated hoses to the inlet and outlet of the jacket to eliminate stress on the inlet and outlet.
●Anti corrosion discharge valve designed for side discharge.
●The lockable caster structure facilitates device movement and positioning.
●Variable frequency speed regulation, digital mixing speed.
●Adopting explosion-proof motors and explosion-proof electrical control boxes,.
●Mixing bearings,Prevent wear and debris from the mixing rod, with good sealing effect and long service life.
●adoptPt100Temperature sensor, high temperature control accuracy,SUS304Material, coated with polytetrafluoroethylene tubeDouble anti-corrosion.
●Push forward typeMixing paddle,PTFE stirring blade;The material of the stirring rod is SUS304, wrapped in polytetrafluoroethylene, with high strength,Strong corrosion resistance.
150L speed regulating double-layer glass reactorMain technical parameters
name |
150L explosion-proof double-layer glass reactor |
|
model |
GR-150Ex |
|
Effective volume inside the kettle (L) |
150.0 |
|
Volume of kettle jacket (L) |
Approximately 45.0 |
|
Condenser heat exchange area (m ²) |
1.32 |
|
Feeding bottle (L) |
10.0 |
|
Recycling bottle (L) |
20.0 |
|
Open a hole on the kettle lid |
Mixing insertion hole |
60 # flange mouth |
Temperature sensor insertion hole |
35 # flange mouth |
|
Condenser connection port |
50 # Standard Ball Mouth |
|
Liquid feeding port |
34 # 2 standard grinding ports |
|
Feeding bottle interface |
40 # Standard Grinding Mouth |
|
Solid feeding port |
95 # flange mouth |
|
Glass components |
3.3 Borosilicate Glass |
|
Working temperature (℃) |
-80～200 |
|
Temperature difference limit inside and outside the kettle (℃) |
≤80 |
|
Pressure inside the kettle (MPa) |
-0.1～0.0 |
|
Jacket pressure resistance (MPa) |
≤+0.03 |
|
Boosting rate of vacuum system |
≤2kPa/h |
|
Explosion proof mixing motor power (W) |
750 |
|
speed regulation method |
variable frequency speed control |
|
Speed adjustment range (rpm) |
50~300 |
|
Explosion-proof marking |
ExdⅡBT4 |
|
temperature sensor |
type |
Pt100 |
Display accuracy (℃) |
±0.1 |
|
Specification for interface of stainless steel insulation hose |
3/4 external thread |
|
Seal material |
Polytetrafluoroethylene |
|
Height of discharge valve above ground (mm) |
About 370 |
|
stirring paddle |
Push forward type |
|
power supply |
220-240V～,50/60HZ |
|
Operating environment temperature (℃) |
5~35 |
|
Relative humidity of the environment (%) |
≤ 65 |
|
Overall dimensions of the machine (mm) |
1210W×1060D×2360H |
|