Product Introduction:

After being connected with vibration and intensity scales, vibration velocity sensors can measure various displacements, velocities, etc. The vibration of the rotor supported by rolling bearings will be sufficiently transmitted to the bearing seat, and the speed of the rotor installed on the bearing seat or very close to the bearing housing will bedegree sensor

Overview

After being connected with vibration and intensity scales, vibration velocity sensors can measure various displacements, velocities, etc. The vibration of the rotor supported by rolling bearings will be sufficiently transmitted to the bearing seat, and it can be installed on the bearing seat or very close to the bearing housingThe speed sensor is powered by an internal motion coil that cuts magnetic field lines and outputs voltage, providing signals to monitoring instruments for alerting mechanical faults.

Technical Specifications:

Sensitivity: 20~50mV/mm/S ± 5% (adjusted by the user)

Frequency response (optional): 2-300 Hz10~1000 Hz

Natural frequency: about 10Hz

Amplitude limit: 2mm (peak to peak)

High acceleration: 10g

Installation method: Vertical; Level; Vertical and horizontal dual-use type

Temperature range: -30 ℃~120 ℃

Relative humidity: up to 95% non condensing

Dimensions: p35x75m

feature

1. No power supply required, output proportional to vibration intensity

2. Easy to install

Zhengzhou Hangke Instrument Co., Ltd

Main business: eddy current sensors, vibration sensors, tachometers, integrated vibration transmitters, integrated eddy current sensors, pressure transmitters, temperature sensors, speed sensors, shaft vibration transmission protection meters, shaft vibration monitoring instruments, shaft displacement monitoring instruments, portable vibration meters, thermal expansion sensors, vibration temperature combination probes, three parameter combination probes, four parameter combination probes