1、 Introduction:

The integrated vibration transmitter is mainly composed of a vibration velocity sensor and a transmitter module, which can be used to monitor the vibration status of the casing of rotating machinery such as fans, water pumps, and coal mills,It converts the vibration velocity value (or displacement value) intoOutput standard 4-20mA current signal, can be connected to PLC, DCS systems, etc. The transmitter adopts a two-wire connection method, making wiring simpler and more convenient. Integrated structure. Durable, high temperature resistant, impact resistant, waterproof and resistant to harsh environments. Multiple installation methods, multiple vibration ranges, and various cable specifications can meet the application requirements of various occasions.

IIMain technical performance and indicators:

Frequency response: 10-300 Hz

5-1000 Hz (optional)

2 Measurement Range: Displacement 0-1000um (optional)

Speed range 0-100mm/s (optional) * 0-25.4mm/s (factory set value)

3. Working voltage: 24V DC

4 Output current: 4-20mA

5 output impedance: ≤ 500 Ω

6 Protection level: IP66

7 Explosion proof mark: Exd II C T6 Gb

Measurement direction: vertical or horizontal

9. Operating environment: Temperature: -40 ℃~85 ℃

Relative humidity: ≤ 90%

10 Dimensions: φ 80 × 135mm

11 Installation thread: M16 × 1.5 × 10mm (depth)

12 Weight: Approximately 550g