09,22,2026 15 views
Wireless high-voltage phase analyzer is a very important test item for checking the phase of the power supply on both sides of the closed-loop circuit breaker in the construction or maintenance process of power system ring network and dual power supply network. Otherwise, short circuit may occur, and the consequences are unimaginable. The wireless high-voltage phase detector adopts power electronic detection technology and wireless transmission technology, which is safe and reliable to operate, easy to use, overcomes many disadvantages of wired phase detectors, and meets the relevant standards for quality supervision, inspection, and testing of power safety tools.
The main advantage of wireless high-voltage phase analyzer is that it eliminates the lead wires connecting the two ends of the power grid (power supply), and can pass through walls and partitions (boards) at a distance of up to 30m. It is not limited by any terrain or facility structure, improving safety and making operation extremely convenient. Only one person needs to operate and one person needs to supervise.
Precautions for daily operation of wireless high-voltage nuclear phase analyzer
1. When using, it is necessary to carefully follow the safety rules and regulations of our unit, strictly comply with the relevant provisions of DL408-91 Safety Work Regulations (Electrical Part of Power Plant Substation), carefully store the instruments, and regularly check the insulation.
2. During nuclear phase operation, the handheld position should not exceed the warning position of the insulation rod. This instrument can be designed without grounding. For safety reasons, it is recommended to ground it reliably!
3. The transmitting and receiving devices of this instrument both use DC 9V batteries, which can be used for one and a half years under normal use. If used frequently, the voice volume will significantly decrease. At this time, the same type of battery should be replaced to avoid affecting the normal use of the instrument;
4. The positive and negative terminals of the battery used in this instrument are on the same side, so special attention should be paid not to reverse the battery when replacing it, in order to avoid battery explosion and unnecessary injury to personnel;
5. If the instrument is not used for a long time, please remove the battery to prevent the battery from leaking corrosive solution and damaging the instrument!
Precautions for transportation and storage of wireless high-voltage nuclear phase analyzer
1. Transportation: The instrument must be packed during transportation. The packing box can be a carton or a wooden box. The packing box should be padded with a foam shockproof layer.
Packaged products should be able to be transported by road, railway, and air. During transportation, it is not allowed to be placed in an open cargo box.
2. Storage: When the instrument is not in use, it should be stored indoors at an ambient temperature of -20 ℃ to 60 ℃, with a relative humidity not exceeding 85%, and with ventilation and no corrosive gases. Storage should not be placed close to the ground or walls.
3. Moisture prevention: In humid areas or seasons, be sure to pay attention to moisture prevention. The warehouse should pay attention to rain, dust, and mechanical damage prevention.
4. Sun protection: When using the instrument outdoors, try to avoid or reduce direct exposure to sunlight as much as possible.
