∑ 7 servo motor (linear type) SGLFW2

NegotiableUpdate on 03/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

∑ 7 servo motor (linear type) SGLFW2

Product Details

servo motor SGLFW2 type (core F-type) Rated values and specifications

Specification Table

linear servo motor Dynamic model SGLFW2-		30A			45A		90A		1DA
		070A mouth	120A mouth	230A port	200A mouth	380A port	200A mouth	380A port	380A port
Rated time		continuous
Heat resistance level		B
Insulation resistance		DC500V, 10M Ω or above
Insulation withstand voltage		AC1500V for 1 minute
Excitation method		Permanent magnet type
Cooling method		Self cooling and water cooling*
Protection structure		IP00
Environmental conditions	Environmental temperature for use	0 ° C to 40 ° C (not frozen)
	Environmental humidity for use	20% RH to 80% RH (non condensing)
	Installation site	Indoor areas without corrosive or explosive gases • Places with good ventilation, low dust, garbage, and moisture • Places that are easy to inspect and clean • Altitude below 1000m Places that do not generate strong magnetic fields
Impact resistance Strength	Impact acceleration	196m/s²
	Number of impacts	2 times
Vibration resistance	Vibration acceleration	49m/s² (Vibration resistance in three directions: up and down, left and right, and front and back.)

*For details about water-cooled models, please consult our sales window.

Rated value:

*The value when the armature coil temperature is 100 ° C after being combined and operated with the servo unit. The values for other items are at 20 ° C. All values are standard values.

*2. Rated thrust refers to the continuous allowable thrust value when installed on aluminum heat sinks of the following dimensions and at an ambient temperature of 40 ° C.

• Size of heat sink

• 150 × 100 × 10mm：SGLFW2-30A070A
254 × 254 × 10mm: SGLFW2-30A120A, 30A230A
400 × 500 × 10mm: SGLFW2-45A200A, 45A380A

Thrust velocity characteristic

(Note)

The value when the armature coil temperature is 100 ° C after being combined and operated with the servo unit. All values are standard values.

The characteristics of the repeatedly used area may vary depending on the power supply voltage.

If the effective thrust is within the rated thrust, it can be used in the repeated use area.

4. For servo motor main circuit cables exceeding 20m, the voltage drop will increase and the repeated use area will narrow. Please be aware.

RATING