1400A insulated dense bus duct

1400A insulated dense bus duct

structural characteristics

1. The busbar trunking adopts a docking installation method, which makes the installation process of the busbar trunking very convenient, flexible, and greatly saves installation time.

2. The bus duct adopts a separated air insulation type, which improves the heat dissipation of the bus duct and reduces the impedance; The internal insulation components are made of high-strength epoxy resin, which improves the frost resistance and thermal stability of the bus duct.

3. All current levels of bus ducts use a unified cover plate, with high standardization, strong interchangeability, and convenient variable capacity interfaces.

4. Bus ducts can be diverted through plug-in boxes to avoid the troubles of cable stripping and unsafe connections. If your product or equipment is replaced, reassemble and install the busbar, and the busbar socket branch can always reach the position you need. Therefore, using busbar trunking for power distribution can satisfy you for life.

The internal conductor adopts a new type of integral coating technology for insulation, and is stacked together to form a compact structure without forming a "chimney effect" combustion path. The molded aluminum alloy enclosed shell has high strength, excellent corrosion resistance, heat dissipation, and can be used as a grounding wire to ensure sufficient safety, providing a reliable grounding path for grounding faults and a path for ground wire short circuits. When a high-capacity grounding fault occurs, it can effectively ground and protect the entire system. This structure can effectively balance the impedance of each phase, thereby greatly reducing the voltage loss of the bus duct system. The environmental performance meets the requirements of the EU ROHS directive, and the main materials will not produce toxic or harmful gases in case of fire, which is safe and environmentally friendly.

1400A insulated dense bus duct

Product Parameters:

The shell is assembled using cold-rolled profiles and imported non perforated riveting equipment for better sealing effect. The Zigong dense busbar trunking has a protection level of IP66, and the structural strength of the supplied dense busbar trunking is increased. Standard sections can be made into 3m, 6m, and 8m (depending on user requirements), and sockets can be set at any position according to customer requirements, with a spacing of no less than 0.6 meters between sockets. Enclosed bus ducts are suitable for places such as automobile manufacturing workshops, large shopping malls, exhibition halls, sports halls, airports, and high-rise buildings.

The special feature of this dense bus duct is that it can arrange two sockets within one meter of length, such as two sided sockets, which can reach four sockets without affecting the support strength of the bus. By inserting the current branch through the plug-in box, one can avoid the trouble of cable stripping and unsafe connection. If your product or equipment is replaced, reassemble and install the busbar, and ensure that the busbar socket branch always reaches the position you need. Therefore, using busbar wiring can satisfy you for life.

The rated working current ranges from 250A-4000A. The shell is assembled using cold-rolled rolled profiles and imported non perforated riveting equipment for better sealing effect. The Zigong dense busbar trunking has a protection level of IP66, and the structural strength of the supplied dense busbar trunking is increased. Standard sections can be made into 3m, 6m, and 8m (depending on user requirements), and sockets can be set at any position according to customer requirements. The spacing between sockets should not be less than 0.6 meters. Enclosed bus ducts are suitable for places such as automobile manufacturing workshops, large shopping malls, exhibition halls, sports halls, airports, and high-rise buildings. Beautiful color and protection level above IP45. The shell grounding is convenient, reliable, safe, and the protection circuit connectivity test is qualified. I have found several cases where the insulation of the bus duct was reduced due to the stress damage of the bolt insulation sleeve. The grounding connection adopts a busbar shell that can meet the grounding requirements, but when the busbar shell is completely sprayed, the two sections of the busbar trough must be connected with grounding bolts using wires. Before and after installation, the insulation of the bus duct should be inspected and compared to check whether the insulation of the bus duct has decreased due to installation quality issues.

Nine major advantages of the system

1. Meet load requirements, dense bus duct specifications, 100A-6300A

2. The four protection functions of anti-corrosion, moisture-proof, dustproof, and waterproof, with a protection level of up to IP65

3. Non magnetic shell design, eliminating magnetic eddy interference

4. The zigzag structure is a thinner and better structure

5. Bus duct can form 360 degree protection

6. Double grounding system, dense busbar trunking function,Shielding magnetic fields for safer electricity usage

7. Two page (riveted) assembly, sandwich structure design, capable of withstanding strong mechanical impacts

8. The appearance adopts a heat sink design, with low temperature rise and low consumption

9. Can monitor temperature rise