180 degree wire swing testing machine

Cable Bending Tester

Product Introduction:

The wire swing testing machine, also known as the wire bending testing machine, complies with the relevant standards such as UL817 for the general safety requirements of flexible wire components and power cord.

Suitable for manufacturers and quality inspection departments to conduct bending tests on power cords and DC cords.

Used for testing the bending resistance and performance of wires, cables, and various products under certain conditions such as speed, angle, weight, and frequency.

Product parameters:

1. Test station: 6 groups (simultaneous testing)

2. Bending angle: 0~180 ° (indicated by a dial and pointer, manually adjustable)

3. Bending angle display and adjustment: indicator needle indicates scale dial, manual adjustment of eccentric shaft

4. Test speed: 10~60 times/minute (knob speed regulation, LCD display)

5. Total swing count counter: 0~999999 times (can be preset, automatically stops when the count is reached)

6. Swinging continuity counter: 0~999999 times (continuity is automatically counted, one group is disconnected, and counting stops automatically)

7. Hook weights: six each for 50, 100, 200, 300, and 500g

8. Handle test fixture: six sets of anti slip, non easily damaged test sample special fixtures

9. Test fixing rod: adjustable up and down, fixing the lower end of the product, making the test more in line with standards

10. Working power supply: AC220V, 50HZ

Testing method:

Fix the sample on the fixture and apply a certain load. During the test, swing the fixture left and right. After a certain number of times, check its breakage rate; Or when it cannot be powered on, check the total number of swings. This machine can automatically count and stop automatically when the sample is bent until it breaks and cannot be powered on.

Characteristics of wire bending testing machine:

1. This chassis is treated with electrostatic spray painting and designed according to various standards. The overall design is reasonable, the structure is tight, and the operation is safe, stable, and accurate;

2. The test count counter can be pre-set, and the test continuity counter automatically counts. When the count is reached, the machine automatically stops and has a power-off memory function, which is convenient and practical;

3. The test speed knob is adjustable, with LCD display. Customers can set it according to their own requirements, with a user-friendly design;

4. The bending angle can be manually adjusted, and the indicator needle indicates the scale dial for better adjustment;

5. Six sets of workstations work simultaneously without affecting each other, counting separately. If one set breaks, the corresponding counter stops counting, and the machine continues to test as usual to improve testing efficiency;

6. Six sets of specially designed handles for anti slip and non easily damaged test samples, making it more convenient and efficient to grip products;

7. The test fixing rod can be adjusted up and down, and is made according to standard requirements for better test results;

8. Equipped with hook load weights that can be stacked multiple times, making suspension more convenient.

WEISSTECH website:

http://www.weiss.tech/

http://www.weiss.cx/

http://www.weiss17.com

http://www.qe-test.com

http://www.weisstech.com.cn/

Follow Wes's official account to learn more about the test box!