600mm cleaning unit (U2V/2UV)

Nowadays, clean technology has been widely applied in the production of products in various industries or other environmental controls that require prevention of particle and microbial contamination. For example, in a dust-free workshop that produces electronic components for mobile phones, the main purpose of air purification is to remove suspended dust particles in the air, create a clean working environment, and ensure high quality, precision, purity, and output of products.

In the field of electronic products, electronic components range from electronic tubes to semiconductor separation devices to integrated circuits, and the line width of integrated circuits alone has increased from a few micrometers to approximately0.1 microns, such as in the pre production stages of SMT, exposure, etching, inspection, etc., requires a miniaturized and precise production environment.

Before dust removal, the surface static electricity is first removed by an electrostatic elimination device, and then the boundary layer between dust and materials is broken through a specially designed dust removal unit, which generates ultrasonic airflowvibrationAfter the surface dust of the material becomes loose, it is sucked away by the vacuum suction of the dust removal unit, thus achieving the effect of dust removal.

Characteristics and advantages of non-contact dust removal deviceAnd working principle:

1Non contact structure avoids material damage. Ultrasonic waves can break through the air viscosity layer and thoroughly remove extremely small particles（Dust above 1.6um.

2. The airflow blown out from the dust removal unit is fully utilized, controlling the entire airflow and vacuum, thereby ensuring continuous cleaning performance without being affected by material thickness.

3. Efficient airflow control can also be applied to some low-pressure airflows, reducing losses.

4. The non-contact cleaning method prevents the workpiece being cleaned from being scratched or damaged.

5. The closed-loop system will not disrupt the airflow balance in the production workshop (clean room).

6. No need for expensive consumables such as high-purity water or chemical agents, and no need for subsequent drying, reducing production costs and shortening the length of the production line.