80 standing brake drum standing car

Name: 80 standing brake drum standing car
Brand: Tengzhou Shenglian Machinery Co., Ltd
Availability: InStock

Online Consult

Overview

Product Category: Vertical Lathe Brief Introduction:

、

After the machine tool is installed and fixed, carefully clean the rust proof oil on it with cleaning agent or kerosene. Do not wipe the paint surface with gasoline. The cleaned surface of the parts should be lubricated with engine oil to prevent rust.
Familiarize and master the functions of various components of the machine tool, as well as the roles of various operating handles and button switches.
According to the lubrication requirements of the machine tool, oil should be injected into the gearbox and turbine box, and all lubrication parts should be lubricated with oil.
Place the gear shift lever in neutral position, set the fast/slow lever and the lifting lever to 0 position, press the start button to start the machine, check if the direction of the belt rotation is consistent with the arrow direction on the belt cover. If not, adjust any two of the three-phase power supplies.
When the motor is idling, shake the feed screw by hand to move the tool holder up and down, check and adjust the stroke switch stopper to ensure accurate and reliable operation of the stroke switch.
Experiment with various rotational speeds and tool feed rates, with an idle running time of no less than 5 minutes. Attention: The machine should be stopped and the speed should be changed to avoid damaging the components.