95-2 Constant Temperature Magnetic Stirrer

summary:
The high heating temperature and constant temperature sensitivity of 95-2 have taken the automation of chemical experiment stirring a step forward, and it is also an ideal tool for matching various analyzer and stirrer solutions.

characteristic:
This product draws on the advantages of similar products at home and abroad, using a motor as the drive, with the advantages of smooth speed regulation and low noise. The heating technology used in this product has fast heating speed, uniform and adjustable heating temperature, automatic constant temperature stirring, safe use, and reliable performance. The 95-2 model also has a timed mixing function.

95-2 Constant Temperature Magnetic Stirrer Product Performance:
1. Stepless speed regulation: 0-2000 revolutions per minute
2. Electric power: 20W
3. Heating power: 500W
4. Mixing capacity: 20-3000ml
5. Temperature control range: Room temperature -250 ℃ (digital constant temperature display)
6. Temperature control accuracy: ± 1 degree
7. Timing range: 0-120 minutes
8. Tray size: Φ 130mm
9. Environmental conditions for use: temperature 0-40 ℃; Same temperature 85%
10. Power supply voltage: AC220V 50HZ

Attention:
1. If the stirring element jumps or does not stir during stirring, please cut off the power and check whether the bottom of the beaker is flat and the position is correct. At the same time, please measure whether the current voltage is between 220 ± 10V, otherwise the above situation will occur.
2. The heating time should generally not be too long, and intermittent use can prolong the service life.
3. Medium speed operation can work continuously for 8 hours, while high-speed operation can work continuously for 4 hours.
4. If leakage is found after long-term use, please check whether the heating ceramic tube is damaged, because the heating wire is 220V straight through, or check whether collision causes the circuit and insulation tube to fall off. If you do not understand the electrical principle, please do not dismantle or repair, and notify the manufacturer for repair.
When the magnetic stirrer is in operation, it should be supervised by a dedicated person. Do not touch the surface of the workbench with your hands to prevent * *.
6. After completing the work, cut off the power supply.