ABS plastic melt index tester

ABS plastic melt index tester, plastic particle instant tester, melt flow rate tester

Product Name:ABS plastic melt index tester, plastic particle instant tester, melt flow rate tester
Product Model:JX-9022

Product Description:
ABS plastic melt index tester, plastic particle instant tester, melt flow rate testerMainly used to test the uniformity of polymer flow rate during the manufacturing process of thermoplastic materials with low melt viscosity (flow rate between 0.15 and 50g/10min). This machine is measured by timing measurement method under specified conditions such as temperature, load, and piston position inside the cylinder. The rate at which molten plastic is extruded through a fine mold hole of a specified length and diameter is used to determine the uniformity of the flow rate of the polymer in the process, and automatic cutting can be selected. Or manually cut the material, with automatic timing and alarm function.
meet the standard ：ASTM-D1238，D3364、ISO-R1133、JIS-K7210、GB T-3682

Technical Specifications:
Temperature control: normal temperature~400 ℃, PID control, accuracy ± 0.1 degrees (including over temperature protection)
Weights and weightsLoad unit:

weight
Automatic cutting device: automatic cutting, manual cutting can be selected, set time from 0.1 to 9999MIN can be set arbitrarily
circle
pillar
tube
：φ9.5504±0.0076mm
Piston
：φ9.4742±0.0076mm
fine
Kong

model