Air conditioning round cabinet machine trademark front and rear servo running table hot stamping machine

NegotiableUpdate on 03/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Specification parameters and configuration requirements for single pressure running table hot stamping machine Project parameter notes Control system PLC touch screen control Heating plate size 380mm × 250mm Total power 3000W

Product Details

Specification and configuration requirements for single pressure running table hot stamping machine

project	parameter	notes
control system	PLC touch screen control
Heating plate size	380mm×250mm	total power3000W，Hole size70x50mmM6
before and afterRunway itinerary	0--500mm	Servo motor drive for running the treadmill forward and backward
Height range between platform and hot stamping plate	100—450mm	Require smooth manual adjustment
Hot stamping cylinder diameter and stroke	80*80mm
Hot stamping cylinder with adjustable stroke up and down	50mm
Size from the center of the hot plate to the edge of the column	500mm
maximum temperature	0-280℃	Temperature adjustable
Hot stamping pressure	250KGF
Maximum hot stamping speed	600 times/H	Automatic operation speed without load
Repetitive hot stamping accuracy	±0.1mm
Accuracy of entering and exiting the platform	±0.1mm
power supply	220V/50Hz
Gas source	0.5-0.8Mpa
Work platform size	950 (left and right) * 550 (front and back) mm
The height of the tooling platform table above the ground	800mm