Aluminum nitride ceramic sintering furnace

Specially equipped with an independent laboratory to solve product process problems, welcome to experience the heat treatment effect of the equipment on site

Aluminum nitride ceramic sintering furnace

Technical parameters of sintering furnace:

1. The furnace door is located below the furnace, making it convenient and safe to retrieve and store items, with a reasonable and user-friendly design.

2. Using imported 1800 type silicon molybdenum rods as heating elements, the silicon molybdenum rods are distributed in the furnace under high temperature operation for a long time without falling slag or rusting, and the surface becomes increasingly bright

Around the barrel.

3. The control panel is equipped with an intelligent temperature regulator, which controls the power switch, main heating work/stop button, voltage and current meters. This product adopts reliable integration

Chemical circuit, good working environment, anti-interference, furnace shell temperature rise ≤ 30 ℃ when reaching temperature, greatly improving working environment, microcomputer program control, programmable overture

Line, fully automatic heating/cooling, temperature control parameters and programs can be modified during operation, flexible and convenient, and easy to operate.

4. Temperature control accuracy: ± 1 ℃ without overshoot Temperature control accuracy: ± 1 ℃. Fast heating rate, heating rate ≤ 30/min.

5. All furnace materials and lining are made of vacuum formed high-purity alumina fiber lightweight board material, with high operating temperature, low heat storage capacity, resistance to rapid heating and cooling, and no cracks

No slag shedding, good insulation performance (energy-saving effect is over 60% of old-fashioned electric furnaces). Reasonable structure, double-layer inner and outer furnace sleeves, air-cooled heat dissipation, can greatly shorten the test cycle.

Aluminum nitride ceramic sintering furnace

Features:

The furnace door opens and automatically stops heating, effectively protecting the heating elements and the service life of the furnace

Using imported 1800 type silicon molybdenum rod as the heating element, it does not fall off or rust under high temperature operation for a long time, and the surface becomes increasingly shiny.

All furnace lining materials are made of vacuum formed high-purity alumina fiber lightweight board material, with high operating temperature, low heat storage capacity, resistance to rapid heating and cooling, and no cracking

Seam, no slag falling, good insulation performance (energy-saving effect is more than 60% of old-fashioned electric furnaces).

We can also customize sizes according to customer requirements