-
E-mail
15901235199@163.com
- Phone
-
Address
Room 14612, Building 3, No. 1800 Panyuan Road, Changxing Town, Chongming District, Shanghai (Taihe Economic Development Zone, Shanghai)
Product Categories
Pang Yuliang Instrument (Shanghai) Co., Ltd
American Industrial Scientific GTD-5000Tx pump suction oxygen and toxic gas detector
NegotiableUpdate on 05/04
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Introduction: Product Model: GTD-5000Tx Pump Suction Oxygen and Toxic Gas Detector Product Brand: Industrial Scientific Product Category: Multi Gas Detector Product Remarks: Oxygen and Toxic Gas Detector
Product Details
Industrial Scientific Corporation of the United States
Product Introduction of Industrial Scientific GTD-5000Tx Pump Suction Oxygen and Toxic Gas Detector:
Product Model: GTD-5000Tx
Product brand: Industrial Scientific, USA
Product category: Multi gas detector
Product Remarks: Oxygen and Toxic Gas Detector
Product Overview of Industrial Scientific GTD-5000Tx Pump Suction Oxygen and Toxic Gas Detector:
Adopting a built-in sampling pump to achieve rapid response to toxic gas/oxygen leaks
Adopting a built-in microprocessor to achieve self diagnostic function
Equipped with a box type sensor for easier replacement
Using digital flow sensors to maintain a fixed flow rate
Long term stable quality and proven testing principles
Detect toxic gases below the TLV (threshold value) and demonstrate excellent performance
Excellent LCD display screen, displaying various information
Four digit gas concentration display
4-20mA DC output signal
◤ Easily monitor system configuration through RS-485 Modbus isolated serial data communication or PoE (optional)
Level 2 alarm, single fault display, and relay contact output
3-wire system
Single person calibration and maintenance
Product parameters of the American Industrial Scientific GTD-5000Tx pump suction oxygen and toxic gas detector:
| model | GTD-5000Tx |
| Measuring gases | Oxygen/toxic gases (carbon monoxide, chlorine, ammonia, etc.) |
| measurement method | pump-suction type |
| measurement method | Semiconductors, electrochemistry |
| response time | T90<45 seconds |
| precision | ± 3%/full scale |
| Operation method | Front panel switch (calibration, maintenance, alarm settings) |
| Work mode display | 4-LED (power supply, level 2 alarm, single fault) |
| Indication display | LCD display screen (4-digit) |
| Alarm signal output | 250V 1A/3-stage single pole single throw switch (SPST) relay contacts (2-level alarm, 1-fault) |
| output signal | 4-20mA DC |
| RS-485 Modbus (optional)/PoE (Power over Ethernet) (optional) | |
| sampling method | Diaphragm sampling pump |
| Sampling pipeline | Outer diameter: 1/4 inch (standard) |
| traffic | Maximum: 0~1000ml/min |
| Cable/Distance | Power cable+signal cable: three wire>1.5 square (AWG16)/maximum 1000 meters/thermal decomposition device maximum 500 meters |
| RS-485 data communication cable: 1 pair (UL2919 RS-485)/maximum: 1000m | |
| PoE (Power over Ethernet): up to 100m | |
| Pyrolysis type: maximum 500 meters | |
| Pipe connection | Cable Sealing Kit (PG-16) |
| Installation Type | wall-mounted installation |
| Operating Temperature | -20℃~ +60 ℃ |
| Operating humidity | 5-99% RH (non condensing) |
| operating power | Standard: 18~31 volts DC (usually 24 volts DC)/maximum 280mA |
| Pyrolysis reactor (Note 1): 18-31 volts DC (usually 24 volts DC)/maximum 520mA | |
| PoE (Note 2): 48V DC ± 10%/maximum 200mA | |
| material | Front (polycarbonate), side (steel) |
| size | Standard type: 70 (width) x 144 (height) x 160 (depth) mm |
| Pyrolysis type (PY-1000): 70 (width) x 242.5 (height) x 160 (depth) mm | |
| weight | Standard type: 2.5kg |
| GTD-5000 and PY-1000: 4.05kg | |
| certification | CE（EN50270：1999） |
| Note 1 | Current consumption of Polymer (PY1000, PY2000) equipment |
| Note 2 | When using PoE power supply, if you want to use a pyrolysis device, you should provide 24V DC power |
Similar Product Recommend
