Anti secondary impact ball drop testing machine

Anti secondary impact ball drop testing machine

Product Introduction:

The drop ball impact testing machine is a device used to test the impact resistance performance of materials or products, widely used in the impact strength testing of materials such as plastics, building materials, ceramics, coatings, as well as in the fields of electronic products, automotive components, packaging materials, etc. Apply instantaneous impact force to the sample to obtain the required impact energy to destroy the material, and conduct impact comparison tests on the same material.

Product features:

This machine places the test product on the test bench, drops a steel ball of the specified weight freely from the specified drop height onto the product, impacts the product, and then inspects the appearance and various performance aspects of the product.

This device is designed according to the "6.10 Falling Ball Impact Peeling Performance Method" of the "GB9962-1998 Safety Glass Materials for Building - Safety Glass Performance Specification and Test Methods", and meets the requirements of impact testing for building safety interlayers.

Reliability testing standards: JIS R3205:1989, ISO/DIS125421 12543-6:1997 AS/NZS2208:1996

GB9962-199、GB/T13520、GB/T14485、GB/T8814、GB/T 21661-2020

Secondary impact prevention instructions: The testing system uses a touch screen and PLC communication to control the motor driven suction ball and electric component lifting, and cooperates with a distance measuring device to control the height.

After the steel ball is released, it impacts the test surface. If it bounces up again, the device can automatically grab the steel ball through sensor detection.

Product parameters:

1. Steel ball weight: 50, 100, 150, 200, 300, 500, 800, 1000 grams (can be selected according to requirements)

2. Protective device: There are protective net cages around; Two side collision pads

3. Control and lifting methods: Circuit controlled electromagnetic suction cup, electric lifting electromagnetic fixing rod

4. Drop height: 0-200cm (adjustable at any height, choose according to requirements); Or according to customer requirements for height)

5. Drop height display: Touch screen display and height setting

6. Drop height accuracy: ± 1% mm

7. Ball drop control method: DC electromagnetic control

8. Drop rod shape: round rod

9. Sample frame workspace: 400 × 350mm

10. Sample clamping method: fixture clamping

11. Falling iron plate: thickness 15mm

12. Machine size (L × W × H): approximately 500 × 400 × 2300mm

13. Working power supply: 220V ± 10% 50Hz ± 10%

WEISSTECH website:

http://www.weiss.tech/

http://www.weiss.cx/

http://www.weiss17.com

http://www.qe-test.com

Follow Wes's official account to learn more about the test box!