Application of Salt Spray Corrosion Testing Laboratory

Application of Salt Spray Corrosion Testing Laboratory
1. Electrical capacity
Power supply: AC380V ± 10% 50Hz 3-phase 4-wire+separate grounding wire; Z high power: 11KW; Z high current: 25A; air switch capacity: 32A
2. Standard accessories: Salt water tank: 1 (50L/piece); Mist collector: 2 pieces; Glass nozzles: 4; Installation and Use Manual: 1 set
3. Requirements for installation site
The distance between the front of the test box and the wall shall not be less than 800mm, the distance between the back and the wall shall not be less than 600mm, and the distance between the left and right sides shall not be less than 400mm. Users must provide independent distribution switches and sockets.
Application of Salt Spray Corrosion Testing Laboratory

Structural features
1. Integrated structural approach
2. Glass fiber reinforced plastic FRP material insulation: hollow insulation
3. Stainless steel saturated drum humidifier (steam boiler humidifier)
4. Nickel chromium alloy electric heating wire heater, PID regulation, actuator: solid-state relay
5. High temperature resistant engineering plastic spray tower
Salt spray corrosion laboratory control system
1. Armored platinum resistance temperature sensor, high-precision * Pt100.
2. Japanese digital LED "FUJI" temperature controller.
3. Indication accuracy temperature 0.1 ℃;
4. User program capacity comes with 8 segments of programs;
5. Fixed value operation mode;
6. PID balanced temperature control method (with PID self-tuning function);
7. The experimental data displays the set temperature and the measured temperature;
8. Time controller ANLY, programmable timer ATP-8S, can set interval spray cycle.
9. Pressure control: inlet pressure regulating valve, spray pressure regulating valve, pressure gauge.
10. spray pressure: 0.05~0.17 Mpa/cm * The air compressor shall be prepared by the user