Automotive interior leather high and low temperature tensile tester

Automotive interior leather high and low temperature tensile tester, testing standards General/Volkswagen/Toyota

Product Name:Automotive interior leather high and low temperature tensile tester
Product Model:JX-6001
The purpose of the automotive interior leather high and low temperature tensile tester is to successfully combine the high and low temperature testing machine with the tensile testing machine. It is a new type of testing instrument specially developed to detect the physical properties of objects (specimens) in different environments. This instrument is mainly used for low-temperature tensile testing of automotive interior leather.
The machine structure adopts high-quality baking paint treatment, with built-in high-precision, low resistance, gapless double ball screws and guide columns, which improves load efficiency and structural rigidity.
The control system adopts Panasonic servo motors to ensure high efficiency of the rotating system, smooth transmission, low noise, and high speed control accuracy.
The microcomputer system uses a commercial computer as the main control machine, combined with our company's dedicated testing software, to complete all test parameter settings, working state control, data acquisition and processing analysis, result display and printing output.
The product has stable and reliable performance, high measurement accuracy, powerful testing software functions, and easy to understand operation.
The high and low temperature test chamber adopts double-layer insulated glass doors for users to observe the test situation, and adopts a fully stainless steel frame and inner liner, which is not only beautiful, but also has strong corrosion resistance.
Test project:
1. High temperature fracture elongation test of leather
2. Leather low-temperature fracture elongation test
3. Leather high temperature tear test
4. Leather low-temperature tear test
5. Leather low-temperature peeling test
6. Leather high-temperature peeling test and other tests.
Tensile testing specification parameters:
Force measurement display fully computer-controlled, operated in Windows mode
Load decomposition degree: 1/200000
荷重精度：≤0.5%
Displacement resolution: 0.0001mm
荷重精度：≤1%
Test speed: 0.1-500mm/min infinitely variable speed (can be set arbitrarily on the computer)
Test * Large stroke: 1500mm (excluding fixtures)
Two-point elongation decomposition degree: 0.0001mm
Two-point elongation accuracy: ≤ 1%
Test width: 40cm
Power system: Panasonic AC servo motor+drive
Machine size: Main unit (W × D × H) 1200 × 900 × 2800m (approximately)
Power supply: 1 #, AC220V／50Hz
Power: 0.4KW (depending on different force requirements, different power motors are standard, Panasonic servo motors)
Technical parameters of high and low temperature box control system:
Temperature control range: Min. -40 ℃~Max.25 ℃
Cooling rate: from room temperature to -35 ℃ for about 50 minutes
Cooling rate: about 60 minutes at room temperature~250 ℃
Temperature control method: P.I.D. automatic temperature calculation
Control stability: ± 2 ℃
Distribution uniformity: ± 2 ℃
Circulating system: fan forced circulation mode;
Heating system: SUS # 304, stainless steel heater
Humidification system: surface evaporation method, transparent structure, convenient for observation;
Cooling system: Fan cooling method, high-efficiency fully enclosed French Taikang compressor;
Dehumidification system: freezing latent heat dehumidification method;
Internal and external materials: External paint treatment or stainless steel can be selected, internal SUS # 304 stainless steel;
Insulation material: high temperature resistant and high-density vinyl chloride acetate foam insulation material
Inner box size: (L × W × H) 50 × 50 × 1600cm
Temperature control box control system touch screen programmable temperature and humidity controller
Operation mode: Program operation • Fixed value operation
Display section: TFT true color LCD display screen (7 inches)
Setting method: Chinese menu, face-to-face touch screen input with drawing
Program capacity: RAM specifications: 120 program groups, each program can edit 100 segments, and programs can be freely connected in series
Set indication range: temperature -40 ℃~+250 ℃ Time: 0-999 hours and 59 minutes
Set indicator * minimum value: temperature: 1 ℃; Humidity: 1% RH; Time: 1 minute
Communication function: equipped with RC232 communication interface to connect with the computer.
Auxiliary functions: fault alarm and cause, processing prompt function, power-off protection function, power-off protection function; Input interrupt detection function; Timer function; Upper and lower temperature (humidity) alarm function; Automatic operation function of freezer; Self diagnostic function; Real time display function for recording curves, etc; Alarm display function; Backup operation function; Key protection function;
Recording function: Sampling time of 5 seconds, can record curves and experimental data at any time, can query the temperature and humidity situation at any time in detail, can connect to a computer to save data, print recording curves and generate data reports on the computer
Introduction to the Tensile Testing Function System
1. The luxury interface testing software under the Windows XP operating system can achieve control modes such as fixed speed, positioning, fixed load, fixed load rate, stress to strain, and fixed strain rate. In addition, multiple stage conversion control menus can be freely combined to form an infinite number of multi-level control modes: displacement>=, displacement<=, load>=, load<=, drop point, breakpoint ratio, stress>=, stress<=, strain>=, strain<=, which can meet different testing requirements.
2. Randomly switch between multiple languages: Simplified Chinese, Traditional Chinese, and English.
3. More than ten luxurious testing program interfaces.
4. Force (Kg, g, Kn, N, Lb) and displacement (mm, cm, inch) units can be randomly switched, and stress and strain virtual dials: dynamically display the rate of change in stress and strain
5. Data zeroing function: It can reset force, displacement, and deformation separately, or reset force, displacement, and deformation simultaneously.
During the testing process, various curves can be randomly switched and displayed, including load displacement, load time, displacement time, stress-strain, and load two-point extension.
7. Modular design of the testing standard editor for one-time input and long-term calling: providing users with the freedom to set the required testing standards for the application. The architecture of the testing standards is fully developed without any industry limitations, covering metal, non-metal, special materials, and finished product testing standards such as GB, ASTM, DIN, JIS, BS, etc.
8. Modular design of sample data editor for one-time input and long-term calling: providing users with the freedom to set the required application sample data
9. Modular design of formula editor for one-time input and long-term calling: allowing users to freely add, modify, and delete formulas required for various tests to meet the calculation requirements of different tests.
10. Professional level report editor: Simple and flexible. With a simple and easy-to-use report editor like WORD, customers can easily edit and print various reports they like. The built-in dual report editor fully allows users to freely edit various reports, allowing testers to choose their preferred report format (the test program adds built-in EXCEL report editing function to expand the previous pattern of single professional reports).
11. The software has overload protection function: the overload protection load value can be freely set by customers (within the applicable scope).
12. Graphic 3D transformation, comparison of multiple test results, graphic viewing, free coordinate transformation display, and free scaling of various test curves can be used to reanalyze and recalculate test results, calculate non proportional extension strength using hysteresis loop and stepwise approximation methods, set load and displacement points, peel off interval settings, and more.
13. After the test is completed, it can be automatically archived or manually archived. After the test is completed, the maximum strength, upper and lower yield strengths, tensile strength, compressive strength, elastic modulus, elongation, peel interval, maximum value, minimum value, average value, and so on will be automatically calculated.
14. Powerful test result data analysis function: In addition to capturing and calculating various parameters of the test curve obtained from general single order control, it can also capture and calculate various parameters of the curve obtained from special multi-stage control, and can be freely set and calculated.
15. The test results can be output in data formats such as EXCEL
16. It is possible to perform data analysis on test results under a unified batch number, print reports, and freely select and combine test results from different batch numbers for data analysis. The query function for historical test results in report printing: it can be queried separately based on test date, test information, and test results, or the logical combination of the three can be used for historical test result query and statistical function
17. The software has password locking function: it can be used to distinguish the permissions of different users.
Configuration List:
System Configuration Checklist
1 testing machine host
2 high-strength ball screws from Taiwan, 2 pieces
1 high-precision force sensor (200N) imported from the United States
3 Panasonic servo motors, 1 set
4 Panasonic servo drives, 1 set
5 sets of microcomputer touch temperature control system
1 set of computerized tension and pressure control system
1 set of 7 data acquisition systems
1 set of universal testing software system
9 leather stretching fixtures customized according to customer requirements, 1 set
1 set of 10 compressors imported from France
11 Lenovo desktop computers 1 set
12 instruction manuals, 1 copy
1 copy of certificate of conformity 13
1 copy of warranty card 13