Automotive interior leather tensile strength tester

Automotive interior leather tensile strength tester

Model: JX-6010
This instrument is mainly used for testing the tensile, elongation, tear, elastic modulus, and fracture strength of materials such as leather. Equipped with a large deformation fixture, it can test the deformation between any two points. Choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shear and other tests. It can perform tests according to national or international standards such as GB, ISO, ASTM, BS, DIN, JIS, etc., making it an ideal testing and research equipment for factories, technical supervision departments, inspection agencies, research institutes, and universities.
Feature Overview
1. The luxury interface testing software under the Windows XP operating system can achieve control modes such as fixed speed, positioning, fixed load, fixed load rate, stress to strain, and fixed strain rate. In addition, multiple stage conversion control menus can be freely combined to form an infinite number of multi-level control modes: displacement>=, displacement<=, load>=, load<=, drop point, breakpoint ratio, stress>=, stress<=, strain>=, strain<=, which can meet different testing requirements.
2. The computer control system randomly switches between multiple languages: Simplified Chinese, Traditional Chinese, and English.
3. More than ten luxurious testing program interfaces.
4. Force (Kg, g, Kn, N, Lb) and displacement (mm, cm, inch) units can be randomly switched, and stress and strain virtual dials: dynamically display the rate of change in stress and strain
5. Data zeroing function: It can reset force, displacement, and deformation separately, or reset force, displacement, and deformation simultaneously.
During the testing process, various curves can be randomly switched and displayed, including load displacement, load time, displacement time, stress-strain, and load two-point extension.
7. Modular design of the testing standard editor for one-time input and long-term calling: providing users with the freedom to set the required testing standards for the application. The architecture of the testing standards is fully developed without any industry limitations, covering metal, non-metal, special materials, and finished product testing standards such as GB, ASTM, DIN, JIS, BS, etc.
8. Modular design of sample data editor for one-time input and long-term calling: providing users with the freedom to set the required application sample data
9. Modular design of formula editor for one-time input and long-term calling: allowing users to freely add, modify, and delete formulas required for various tests to meet the calculation requirements of different tests.
10. Professional level report editor: Simple and flexible. With a simple and easy-to-use report editor like WORD, customers can easily edit and print various reports they like. The built-in dual report editor fully allows users to freely edit various reports, allowing testers to choose their preferred report format (the test program adds built-in EXCEL report editing function to expand the previous pattern of single professional reports).
11. The software has overload protection function: the overload protection load value can be freely set by customers (within the applicable scope).
12. Graphic 3D transformation, comparison of multiple test results, graphic viewing, free coordinate transformation display, and free scaling of various test curves can be used to reanalyze and recalculate test results, calculate non proportional extension strength using hysteresis loop and stepwise approximation methods, set load and displacement points, peel off interval settings, and more.
13. After the test is completed, it can be automatically archived or manually archived. After the test is completed, the maximum strength, upper and lower yield strengths, tensile strength, compressive strength, elastic modulus, elongation, peel interval, maximum value, minimum value, average value, and so on will be automatically calculated.
14. Powerful test result data analysis function: In addition to capturing and calculating various parameters of the test curve obtained from general single order control, it can also capture and calculate various parameters of the curve obtained from special multi-stage control, and can be freely set and calculated.
15. The test results can be output in data formats such as EXCEL
16. It is possible to perform data analysis on test results under a unified batch number, print reports, and freely select and combine test results from different batch numbers for data analysis. The query function for historical test results in report printing: it can be queried separately based on test date, test information, and test results, or the logical combination of the three can be used for historical test result query and statistical function
17. The software has password locking function: it can be used to distinguish the permissions of different users.
3. Main performance and technical indicators
*High load: 5000N
Effective force range (% F • S): 0.2 to 100
Accuracy of force measurement indication: ± 0.5%
Force measurement resolution: 1/100000
Speed adjustment range: 0.1-500 mm/min
Test speed accuracy: ± 1%
Deformation accuracy: ± 1%
Stretching space: 800 mm (expandable according to user requirements)
Effective test width: 400 mm (expandable according to user requirements)
Data transmission and control method: RS232, which can achieve closed-loop control of load, deformation, displacement, speed, etc.
Safety devices: overload emergency stop device, upper and lower travel limit device, automatic breakpoint stop function.
Power system: Panasonic servo motor+Panasonic servo+reducer+ball screw+high-strength smooth rod linear bearing
Dimensions: L660 × W630 × H2300mm
working conditions
1. Power supply: 220-10%~+15% VAC Frequency: 50 ± 2% HZ
2. Environmental temperature: 5 ℃~38 ℃ (indoor ambient temperature)
Relative humidity: 15-85%
4. Environmental noise: Equipment environmental noise is less than 65 decibels
4. System Configuration Checklist
1 testing machine host
2 sets of BTI ball screws
3 high-intensity light bars, 2 pieces
4 high-precision force sensors (5kN) 1 piece
5 Panasonic servo motors, 1 set
6 Panasonic servers, 1 set
1 set of independently developed computer control system
1 set of 8 data acquisition systems
1 set of 9 experimental software systems
10 sets of pneumatic stretching fixtures
11 two-point extension fixture 1 set
1 copy of manual 11
1 copy of 12 certificates of conformity
1 copy of warranty card 13
1 Lenovo computer from brand 14

Automotive Interior Leather Tensile Strength Tester Automotive Interior Leather Tensile Strength Tester Automotive Interior Leather Tensile Strength Tester Automotive Interior Leather Tensile Strength Tester