BS-5540PE heat shrink packaging machine

BS-5540PE heat shrink packaging machine

Product Introduction:

1. By using a programmable logic controller (PLC) as the center, it can effectively ensure stable and reliable operation of the equipment, and achieve optimal performance. The shrinking process realizes fully intelligent temperature control and strong turbine hot air motor. After shrinking with this equipment, the product looks very good and the quality is also very good.
2. This machine is a new type of shrink packaging machine developed using some new technologies and materials. Its transmission mesh belt is completely made of stainless steel material, and the shrinkage process causes minimal wear to the machine.
Scope of application:

Suitable for the combination packaging of single large items or multiple small items, especially for the shrink packaging of PE film such as mineral water, and using an external cooling fan to achieve the best shrink effect.
Notes:
1. The power supply adopts a 380V three-phase four wire system.
2. Before turning on the power, the conveyor belt speed should be reduced, the thermostat knob should be set to zero, the cooling fan should be turned on, the front, rear, upper, and lower heating pipe control knobs should be increased, and then the power switch should be turned on.

Technical Specifications: