BSCS-D series explosion-proof digital electronic truck scale

The explosion-proof digital electronic car scale adopts isolation, voltage reduction, current limiting, sealing, and fiber optic communication technology. By combining explosion-proof weighing sensors (recommended weighing modules) and explosion-proof weighing instruments (or ordinary instruments placed in a safe area) into an explosion-proof car scale system, the possible sources of explosion (electrical short-circuit sparks, electrostatic friction sparks, high-temperature energy concentration, etc.) in the system are eliminated or cut off, thus achieving the purpose of using the scale in environments with explosive hazards. Except for the difference in explosion-proof function, its relevant technical parameters and performance are the same as those of the standard SCS series electronic truck scale.
The BSCS-D series explosion-proof truck scale is based on:
GB3836.1-2010 "Electrical equipment for explosive gas atmospheres - Part 1: General requirements"

GB3836.2-2010 "Electrical equipment for explosive gas atmospheres - Part 2: Explosion proof type" d ""

GB3836.4-2010 Explosive Atmosphere Part 4: Equipment Protected by Intrinsic Safety Type "i"
GB3836.20-2010 Explosive Atmosphere Part 20: Equipment Protection Level (EPL) Ga

GB3836.18-2010 Explosive Atmosphere Part 18: Intrinsic Safety Systems
Designed and manufactured according to relevant technical requirements, and obtained an explosion-proof certificate after passing inspection by a designated national explosion-proof inspection unit. The explosion-proof mark is E x i b l C T 3/T4Gb.
This product is suitable for use in flammable and explosive gas environments with temperature groups T1-T4 and explosion-proof levels llA and llB in petrochemical, oil fields, gas stations, and other places. Zone 1 and Zone 2 are used for indoor and outdoor vehicle weighing and weighing signal transmission purposes.