-
E-mail
hsupen@ms14.hinet.net
- Phone
-
Address
No. 351 Fuyang Road, Fengyuan District, Taichung City
Product Categories
Xuben International Precision Machinery Co., Ltd
Back type pneumatic indexing plate
NegotiableUpdate on 03/26
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Specification Table Model Unit SUA-170B Disk Diameter mm170 Disk Center Hole Diameter mm40H7 Center Hole Penetration Diameter mm40 Center Height (for vertical use) mm135 Disk T-shaped Slot Width mm12H7 Bottom Guide Key Width mm18h7 (14h7) Minimum Set Angle deg
Product Details
Specification Table
| model | unit | SUA-170B | ||
|---|---|---|---|---|
| Disk diameter | mm | Ø170 | ||
| Diameter of the central hole on the disc surface | mm | Ø40H7 | ||
| Central hole penetration diameter | mm | Ø40 | ||
| Center height (for vertical use) | mm | 135 | ||
| Width of T-shaped groove on the surface | mm | 12H7 | ||
| Bottom key width | mm | 18h7(14h7) | ||
| Minimum set angle | deg. | 0.001 | ||
| Segmentation accuracy | sec. | 20 | ||
| Repetitive accuracy | sec. | 4 | ||
| Locking torque | Air pressure 5~7kg/cm ² | N.m | 200 | |
| Oil pressure 20~30kg/cm ² | N.m | 400 | ||
| Servo motor model | FANUC | - | α4i / ß8is | |
| Mitsubishi | - | HF-104S | ||
| Gear ratio | - | 1 : 90 | ||
| Maximum disk speed (calculated based on FANUC α motor) | rpm | 44.4 | ||
| Allowable load capacity | vertical | kg | 85 | |
| horizontal type | kg | 160 | ||
| Use the tailstock | kg | 160 | ||
| Allowable cutting force | F | N | 14500 | |
| FxL | N.m | 1020 | ||
| FxL | N.m | 180 | ||
| Turbine allowable torque | N.m | 170 | ||
| Permissible consistency | J=W.D²/8 | kg.m² | 0.52 | |
| Turntable weight (excluding motor) | kg | 60 | ||
*Our company reserves the right to change product specifications, dimensions, and design features without prior notice.
Appearance dimension diagram
