Board book heat exchanger BR0.23 series

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Plate heat exchanger is a new type of high-efficiency heat exchanger composed of a series of metal sheets with certain corrugated shapes stacked together. Thin rectangular channels are formed between various plates for heat exchange. Plate heat exchangers are ideal equipment for heat exchange between liquid and liquid, as well as between liquid and vapor. It has the characteristics of high heat transfer efficiency, low heat loss, compact and lightweight structure, small footprint, easy installation and cleaning, wide application, and long service life. Under the same pressure loss conditions, a heat recovery rate of over 90% can be achieved with a footprint of one-third of that of a tubular heat exchanger.

Product Details

.plate heat exchangerIt is composed of a set of corrugated metal plates with holes for the passage of two types of heat transfer liquids. The metal sheet is installed in a frame with a fixed plate and a movable clamping plate on one side, and clamped with clamping bolts. The plate is equipped with sealing gaskets, which seal the fluid channels and guide the fluid to flow alternately into their respective channels.

生产流程1.jpg

Advantages of Plate Heat Exchanger

.High heat transfer efficiency and low heat loss;

.Compact and lightweight structure, small footprint;

.Easy installation and cleaning;

.Widely applicable and with a long service life

Board book heat exchanger BR0.23 series parameters:
Dimensions of the board: 995 * 300 * 0.5
Single piece heat exchange area: 0.238 ㎡
Board spacing: 4mm
Single channel cross-sectional area: 0.00098 ㎡
Maximum processing capacity: 15-70 m ³/h
Flange diameter: 65DN mm
Working temperature: ≤ 150 ° C
Work pressure: 0.6-1.0-1.6MPa
Corner hole diameter: 67mm