Bottle blowing dedicated chiller

Special bottle blowing chillers include: chillers for fully automatic bottle blowing machines, chillers for plastic bottle blowing machines, refrigerators for bottle blowing machines, chillers for bottle blowing machines, freezers for bottle blowing machines, chillers for bottle blowing machines, chillers for bottle blowing machines, chillers for rotary bottle blowing machines, chillers for bottle blowing machines, chillers for bottle blowing machines, chillers for blow molding machines, chillers for hollow forming machines, chillers for fully automatic bottle blowing machines, etc. The bottle blowing machine requires compressed air drying in the production of various mineral water bottles and soda bottles. Clean and dry compressed air is needed for bottle blowing, and the use of frozen water provided by industrial chillers as a cold source can remove moisture from the compressed air. The mold cooling chiller can accurately control the mold temperature, improve product quality, and increase production efficiency. The same chiller can be used as a cold source for compressed air drying and mold cooling. The principle of using a cold water machine for a bottle blowing machine: According to the principle of the refrigeration system, the low-temperature and low-pressure liquid refrigerant exchanges heat with the surrounding water in the evaporator. The evaporator absorbs the heat of the water and evaporates into a low-temperature and low-pressure gas state. During the evaporation process, the temperature of the refrigerant remains unchanged. The low-temperature and low-pressure gas refrigerant enters the compressor, which compresses it into a high-temperature and high-pressure gas state. Then it enters the condenser and exchanges heat with the indoor medium in the condenser. Part of the heat in the high-temperature and high-pressure gas state is absorbed by the medium, and the medium temperature increases. The refrigerant releases heat and the condenser becomes a high-temperature and high-pressure liquid state. The condenser process temperature remains unchanged, and then enters the expansion valve for throttling. Throttling is a rapid cooling process, and the refrigerant becomes a low-temperature and low-pressure liquid state. After this process, the refrigerant enters the evaporator again. Perform heat exchange evaporation, Thus achieving the entire process of the refrigeration system, this cycle is continuous