Box type resistance furnace NWTX-13

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Designed for sintering/baking/annealing/quenching of materials in an oxygen environment. Widely used in ceramics, metallurgy, electronics, glass, chemical industry, machinery, refractory materials, new material development, special materials, building materials, universities, research institutes, industrial and mining enterprises for powder roasting, ceramic sintering, high temperature experiments, material processing, quality inspection, etc

Product Details

The furnace is designed with a rotating side opening furnace door and an independent temperature control cabinet. This furnace strictly follows the requirements of military and navigation standards, and adopts a design concept that has been matured and improved after long-term commercial use. The user interface is simple and easy to learn, and the user's operation and monitoring are more convenient and intuitive. Compared with similar products in China, the equipment has the advantages of low failure rate, stable and reliable use, accurate temperature, and safe operation, which can ensure long-term, safe, stable, and reliable operation.

2、 Main technical parameters of the equipment:
2.1 Working power supply:380V±15%，50Hz

2.2 Work environment: ambient temperature040℃,relative humidity≤90%

2.3 Rated power 8KW

2.4 Insulation power: 5KW (empty furnace, 1200℃ insulation)

2.5 Work area: 400*250*200（mm, deep*wide*High)

2.6 Maximum load capacity 50Kg

2.7 Maximum operating temperature:1300 ℃, capable of long-term operation at room temperature—1250℃。

2.8 Temperature control points: The temperature control point is1 piece

2.9 Uniformity of furnace temperature: ± 5 ℃ (after 30 minutes of insulation above 800 ℃, measure temperature at 5 points on the temperature measuring rack)2.18outside

Technical parameters of high-temperature electric furnace
Electric furnace model		NWTX-12D
Electric furnace form		Box type structure, with the furnace door rotating and opening on the side.
working power supply		380V 50Hz
rated power		12KW
maximum temperature		1200℃
Long term working temperature		room temperature—1100℃
temperature control accuracy		±1℃
heating rate		room temperature—1200℃≤20℃/min
Overall dimensions		1150mm950mm1050mm
heating system	Number of heating zones	1A temperature zone
	Heating zone size	500mm300mm300mm(Deep)wideHigh)
	heating element	Silicon carbide,
	Furnace material	Long term use without cracks or deformation. High temperature strength and wear resistance.
	thermal insulation material	High alumina ceramic fiber, heat-resistant and flame-retardant, does not decompose harmful gases at high temperatures, environmentally friendly and harmless.
Temperature Control System	Temperature measurement method	KType thermocouple, with thermocouple wire threaded inside the corundum protective tube, and the temperature measuring point located at the upper part of the furnace;
	Temperature control method	programmableTemperature Controller.
	Temperature Controller	Automatically execute temperature curves such as heating, insulation, and cooling after operation, without the need for personnel on duty.
	power regulator	three-phaseSCRControllable silicon module, linear voltage regulation, stable and non fluctuating working current.
	low-voltage electrical apparatus	Low voltage electrical appliances such as buttons, switches, AC contactors, and ammeters are all from the Delixi brand.
	Alarm protection	Automatic power-off protection function after overheating and disconnection alarm.
furnace body	Furnace shell material	Double layered shell, processed from cold-rolled steel plates, with surface electrostatically sprayed with plastic powder.
furnace body	Shell temperature rise	Shell temperature≤50℃（1100℃ insulation4Hour).