COREY-205 series integrated carbon sulfur analyzer

1、 Main technical indicators

1.Analysis scope: carbon pool：0.00001-100%

Sulfur Pool: 0.00001-100%

2.Minimum reading: Carbon:0.00001%（0.1ppm）

Sulfur:0.00001% （0.1ppm）

3.Instrument accuracy: comply withGB/T4699.4-2008

4.Analysis time: 20-40second

5.Correction method: Single point or multi-point calibration

2、 Equipment configuration and parameters

1TheCOREY-205Type series high-frequency infrared carbon sulfur analyzerhost 1set

Output power2.5KW/20MHz

Input current20A

Analysis time35Controllable in seconds

Heating temperature1600℃ (adjustable)

analyzeOxygen pressure0.04—0.06MPa

Power gasOxygen or compressed air0.4—0.8MPa

2Mettler

Weighing range of one ten thousandth electronic balance:0.1mg-100g 1Taiwan

3、Acercomputer currentMainstream market configuration1set

4Purification AC stabilized power supplyPRS-5KVA is equal to zero. So this is equal to 1.Taiwan

5Ultrasonic cleanerCD-2000 1Taiwan

6External dimensions:

High frequency infrared analyzer:600×750×900 mm

Electronic balance:200×300×300mm

threeSafety protection of equipment:

The safety protection (including equipment noise) devices of this instrument are complete and reliable, and comply with China's mandatory national standards.

fourAcceptance criteria for instruments

according toGB/T4699.4-2008The technical agreement signed by both parties shall be accepted according to the acceptance criteria.

fivePerformance characteristics of high-frequency infrared carbon sulfur analyzer

1、High frequency induction combustion furnace and infrared detection system：Adopting a whole machine integrated design、Reduced the high-frequency interference of the high-frequency furnace on the infrared detection system during combustionAnd alsoReduced the impact of high-frequency furnaces on combustionHuman body radiation, strong anti-interference ability, and good repeatability,Improve the accuracy of carbon and sulfur detectionAnd stability.

2、Automatic temperature control heating system for furnace head,Built in oxygen purifier device, fully automatic dual brush cleaning and high-pressure dust removal system.Reduced the adsorption of sulfur in the gas path. Increased sulfur contentdetection accuracyAnd stabilityEquipped with lifting cylinders, cleaning cylinders, dust exhaust cylinders, and solenoid valves, all of which are from world-renowned brands.

3、High frequency induction coil:The surface is coated with special materials, which have strong adhesion, oxidation resistance, no detachment, improved induction efficiency, and extended the life of high-frequency oscillation tubes. Long term use of power without attenuation.

4、filter:Two stage filtration device for the whole machine, complete separation of dust and gas after combustion of the first stage 0.4 micron metal filter, and second stagelevelThe 0.2 micron ultra microporous filter ensures that no dust enters the gas path, and the imported material metal filter requires a service life of more than 10 years、

5、detection pool: AdoptingdoubleDetection pool (carbon pool, sulfur pool)

6、Integrated low-power light source room and low-power platinum light source，Constant temperature chamber, high-precision flow controldevice、ofNarrowband filter and infrared pyroelectric solid-state light cone sensor, high-precisionImportSynchronous cutting motor, preamplifier,continuous work10Ten thousand hours without any malfunctions,sampling frequency25.5/Next second,A/DData collection.

7、Flow control system：Adopting high-precision flow control devices to ensure that the flow rate is not affected by temperature, pressure, or changes in gas composition in the gas path,The design of the pneumatic system is simple and has good air tightness,Cylinderair circuit、solenoid valveThe joint adopts world-renowned brandsFree maintenance10Years or more.

8、A tail gas treatment device,Reduce exhaust emissions pollution (patented, patent number:2013 2 0218618.6）