CPCI-1817MIL i7 Dual Core 6U CPCI Reinforced Conductive Controller

NegotiableUpdate on 12/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

CPCI-1817MILi7 Dual Core 6UCPCI Reinforced Conductive Controller is a 6U CompactPCI Core Dual Core Conductive Reinforced Blade Computer, equipped with Intel i7 high-performance processor

Product Details

CPCI-1817MIL i7 Dual Core 6U CPCI Reinforced Conductive ControllerIt is a 6U Compact PCI Core dual core conduction reinforced blade computer, using Intel ® I7 high-performance processor, QM57 Express Chipset chip. The main components of the product, such as processor, memory, and hard disk, are designed on board and can be operated in a wide temperature range of -40 ℃ to 80 ℃. The product has a mature design and can work stably and reliably for a long time. It has passed strict vibration and temperature shock tests in aerospace and military armored vehicle systems and is widely used in the field of military computers.

CompactPCI bus:		J1/J2 supports 32Bit, 33/66MHz CPCI bus Compatible with PICMG 2.0 core specifications, PICMG 2.1 hot swappable specifications, 3.3V/5V VIO signal environment Expanding CPCI bus through PCI-E * 16 to PCI bridge
Central Processing Unit		CPC-1817-MIL：i7-620UE 1.06GHz,BGA,4 MB Smart Cache,18W TDP Mobile Intel® QM57 Express Chipset
Memory:		Onboard 4G DDR3 ECC SDRAM 800/1066MHz memory
Image display:		The platform supports DVI-I+DVI-D dual display VGA、LVDS Rear panel: DVI-D and DVI-I support dual screen up and down, left and right extended display modes, and single screen supports 1600 x1200 (60Hz refresh rate) Rear panel LVDS (18 bit) port shares PIN pin with DVI-D
Storage interface:		Front board: Onboard 8GB SSD CPC-1817-MIL: Supports CF card, not SATA Rear IO board: 2 SATA
PMC、XMC：		/
Network interface:		Rear IO board: 2 independent 10/100/1000M Ethernet ports to the rear IO board 2-channel redundant Gigabit Ethernet provides PICMG2.16 functionality to the backplane
Front panel interface:		CF card slot
Rear IO panel interface:		CPC-RP807: USB2.0 x2, DB9 type RS232422485 switchable, Y-shaped PS/2, DVI-D, DVI-I, GbE x2, MIC-IN/LIN-IN/LINE-OUT
System detection:		WINBOND W83627DHG built-in watchdog timer, supports 1-255 seconds or 1-255 minutes, 510 levels, timeout interrupt or reset system Hardware detection system voltage, current, temperature
Environmental specifications:		Working temperature: -40 ℃~80 ℃ Storage temperature: -40 ℃~85 ℃
Mechanical specifications:		6U board specification: 4HP × 233mm × 160mm (H × W × D) to attack: 30g, 11ms (working state) 50g, 11ms (non working state) Vibration (5Hz-2000Hz): 3Grms (working status) 5Grms (non working state) Salt spray test: 2g/m3, test method according to GJB150.11-86 regulations, can work normally Mold test: tested according to the method specified in GJB150.10-86, meeting the first level requirements Damp heat test: Metal parts have no corrosion under the condition of relative humidity of 100%; Can be stored and operated normally under conditions of 40 ℃± 2 ℃ and relative humidity of 93% ± 3 Oil mist test: 40mg/m3, capable of normal storage and operation
Compatibility specifications:		PICMG 2.0 R3.0 Compact PCI Specification PICMG 2.1 R2.0 Compact PCI Hot Swap Specification PICMG 2.16 R1.0 Packet Switching Backplane Specification
Operating System:		Windows XP、Windows2000、Linux、VxWorks