-
E-mail
1172591273@qq.com
-
Phone
1806687891213347428711
-
Address
5th Floor, Tongda Building, No. 10 Keji Road, Xi'an City
Product Categories
Xi'an Xinmin Electronic Technology Co., Ltd
CYB11W series micro pressure transmitter
NegotiableUpdate on 12/15
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1、 Product Introduction: CYB11W series micro pressure transmitter adopts imported high-precision and high stability micro pressure sensitive chip. After strict precision temperature compensation, linear compensation, signal amplification, V/I conversion, reverse polarity protection, pressure overload current limiting and other signal processing, it reliably converts very small parameters such as wind pressure and flow rate into industrial standard 4-20mA or 0-10VDC signal output
Product Details
Brief introduction
The CYB11W series micro pressure transmitter adopts imported high-precision and high stability micro pressure sensitive chips. Through strict precision temperature compensation, linear compensation, signal amplification, V/I conversion, reverse polarity protection, pressure overload current limiting and other signal processing, it reliably converts very small parameters such as wind pressure and flow rate into industrial standard 4-20mA or0～10VDC signal output.
This transmitter can be widely used in the fields of food, environmental protection, metallurgy, power, textile, electronics, medicine, etc. to measure and control the pressure of very small non corrosive dry gases in the production process. measurableDry gases below 10KPa with a minimum range of 100Pa are ideal products for automated testing of ultra clean plants and boilers.
2、 Technical performance
Range of measurement |
0～±100, 500... 1000 (Pa) |
accuracy |
±0.5%F.S±1%FS |
0 to ± 2, ±5(KPa) |
Long term stability |
≤±0.3%F. S/year |
|
Overload pressure |
≤200%FS |
Medium temperature |
－20～+85℃ |
Measurement medium |
Non corrosive dry gas |
Response time |
≤1ms |
Output signal |
4～20mA two-wire system |
Pressure interface |
Φ8Tower type interface |
0～10VDC Three-wire |
Electrical interface |
Cable outgoing line |
|
Supply voltage |
12-36VDC (calibrated value is+24VDC) |
Shell material |
1Cr18Ni9Ti or aluminum alloy |
3、 Product Features
●Measure the wind pressure and flow rate of non corrosive dry gases
●Can continuously measure negative and positive pressure
●High sensitivity, capable of measuring less than100PaMinor pressure
●High precision and good stability
●anti-interference design
●Small size, easy to install
4、 Exterior structure
5、 Product selection
CYB11W |
Micro pressure transmitter |
||||||
G |
gauge pressure |
||||||
0~X (Pa or KPa) |
range |
||||||
J03 |
±0.3%FS |
||||||
J05 |
±0.5%FS |
||||||
J10 |
±1%FS |
||||||
C1 |
4~20mA output |
||||||
C3 |
1-5VDC output |
||||||
C0 |
special |
||||||
M4 |
Φ 8 tower type interface |
||||||
M0 |
special |
||||||
F2 |
Direct cable outlet |
||||||
F0 |
special |
||||||
Similar Product Recommend