CYB130 Ceramic Pressure Transmitter

NegotiableUpdate on 12/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1、 Product Introduction CYB130 Ceramic Pressure Transmitter is a highly stable ceramic piezoresistive sensor that uses laser resistance adjustment and advanced thick film technology for temperature compensation, linear compensation, signal amplification, V/I conversion, reverse polarity protection, pressure overload current limiting, and other signal processing to output industrial standard current signals

Product Details

Brief introduction

CYB130 CeramicsThe pressure transmitter isuseHighly stableCeramic piezoresistivetypesensor，Through laser resistance adjustment and advanced thick film technology temperature compensation, linear compensation, signal amplificationV/I conversion, reverse polarity protection, pressure overload current limiting, and other signal processing to output industrial standard current signals.

Should be transmittedThe device hasCorrosion resistance, wear resistance, impact resistance, and vibration resistanceWaiting for advantages.widely useda surnameThere are many fields such as process control, environmental control, hydraulic and pneumatic equipment, servo valves and transmissions, chemical products and chemical industry, and medical instruments.

2、 Product Features

●Corrosion resistance, wear resistance, and impact resistance

Dry structure, pollution-free

● Good long-term stability

●All stainless steel structure
● Compact size, easy to install

IIITechnical performance

Range of measurement	0-0.5, 1, 2, 2025(MPa)	accuracy	±0.5%F.S
Range of measurement	0-0.5, 1, 2, 2025(MPa)	Long term stability	≤± 0.2% F.S/year
Overload pressure	≤ 150%FS	Medium temperature	-20～+80℃
Measurement medium	Gas, liquid	Response time	≤1ms
Output signal	4-20mA two-wire system	Pressure interface	M20×1.5perhapsG1/2
Output signal	4-20mA two-wire system	Explosion proof mark	ExiaIICT6
Supply voltage	12-36VDC (calibrated value is+24VDC)	Protection level	IP65

4、 Appearancesize

（1）Direct outgoing line

图片1.png

（2）Hesman leads out

5、 Wiring method

1. 4~20mA (two-wire system)）Wiring definition:

Red line: DC power supply+Yellow line: signal+

图片3.png

6、 Precautions

1. The maximum instantaneous pressure of the tested system may not exceed the rated value of 150% FS

2. It is strictly prohibited to randomly hit, impact, dismantle, forcefully clamp or poke the pressure hole with sharp tools.

3. The transmitter should be installed as much as possible in a well ventilated, dry, non corrosive, cool, and temperature sensitive area.

4. When there is an abnormal output, please stop the machine immediately for inspection and contact the company's technical service department as soon as possible. Do not disassemble the product without authorization.

5. Please read this manual carefully before using the product. The content of this manual may be changed without prior notice or notification due to product improvements.