Card sleeve elbow bend intermediate joint

UE type card sleeve elbow card sleeve bending middle joint. It is an important component of the gas source pipeline and hydraulic pipeline. Sealed pipe joints suitable for non corrosive or corrosive media such as oil, water, and gas, with flexible specifications for aluminum-plastic pipes. After being connected to pipelines, they have the characteristics of reliable connection and good sealing performance. Therefore, they are widely used in refining, chemical, light industry, textile, metallurgy, shipbuilding and other systems; It is also applicable to various mechanical engineering, machine tool equipment and other hydraulic transmission pipelines.

Card sleeve bending middle jointIt consists of three parts: connector body, sleeve type, and nut. When the card sleeve and nut sleeve are inserted into the joint body on the steel pipe and the nut is tightened, the outer side of the card sleeve front end is in contact with the conical surface of the joint body, and the inner blade is evenly bitten into the seamless steel pipe, forming an effective seal. Overview of right angle sleeve joint: The sleeve type pipe joint consists of three parts: joint body, sleeve type, and nut. When the card sleeve and nut sleeve are inserted into the joint body on the steel pipe and the nut is tightened, the outer side of the card sleeve front end is in contact with the conical surface of the joint body, and the inner blade is evenly bitten into the seamless steel pipe, forming an effective seal

Card sleeve bending middle joint1. Through threaded mechanical propulsion, the sleeve nut moves forward to push the rear sleeve forward, while the rear sleeve pushes the front sleeve forward. 2. The front card sleeve of the joint body is pressed inward

precautions

（1） When connecting pipelines, the pipes should have sufficient deformation allowance to avoid being subjected to tensile forces.

（2） When connecting pipelines, avoid subjecting them to lateral forces, as excessive lateral forces can cause poor sealing.

（3） When connecting pipelines, they should be done in one go to avoid multiple disassembly, otherwise it will also deteriorate the sealing performance.

Card sleeve connector, the specification of the card sleeve connector consists of three parts: connector body, card sleeve, and nut. When the card sleeve and nut sleeve are inserted into the joint body on the steel pipe and the nut is tightened, the outer side of the front end of the card sleeve is in contact with the conical surface of the joint body, and the inner blade is evenly bitten into the seamless steel pipe, forming an effective seal. It is easy to install and has high pressure resistance, making it widely used.

　　
304 stainless steel tube fittingThe working principle is to insert the steel pipe into the sleeve, lock it with the sleeve nut, resist the sleeve, and cut into the pipe to seal it. It does not require welding when connected to steel pipes, which is beneficial for fire prevention, explosion prevention, and high-altitude operations, and can eliminate the drawbacks caused by careless welding. Therefore, it is a relatively advanced connecting component in the pipeline of automatic control devices in refining, chemical, petroleum, natural gas, food, pharmaceutical, instrumentation and other systems. Suitable for connecting pipelines for media such as oil, gas, and water.

The sleeve type pipe joint consists of three parts: the joint body, the sleeve, and the nut. When the card sleeve and nut sleeve are inserted into the joint body on the steel pipe and the nut is tightened, the outer side of the front end of the card sleeve is in contact with the conical surface of the joint body, and the inner blade is evenly bitten into the seamless steel pipe, forming an effective seal.