Cement plant temperature transmitter

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Thermocouple input. $r $n isolated two-wire system, 4-20mA output. $r $n has an output signal zero point and a full-scale potentiometer. $r $n high-precision conversion, linearization correction. The unified external structure of $r $n has a small volume and light weight. A transmitter with sensors usually consists of two parts: the sensor and the signal converter. Sensors are mainly thermocouples or thermistors; The signal converter is mainly composed of a measurement unit, a signal processing unit, and a conversion unit (due to the standardization of industrial thermal resistance and thermocouple calibration tables, the signal converter is also called a transmitter when it is an independent product)

Product Details

Thermocouple input.
Non isolated two-wire system, 4-20mA output.
Equipped with output signal zero and full potentiometer.
High precision conversion, linearization correction.
Unified exterior structure, small size and light weight. A transmitter with sensors usually consists of two parts: the sensor and the signal converter. Sensors are mainly thermocouples or thermistors; Signal converters are mainly composed of measurement units, signal processing and conversion units (due to the standardization of industrial thermal resistance and thermocouple calibration tables, signal converters are also called transmitters when they are independent products). Some transmitters have added display units, and some also have fieldbus functions. As shown in the figure on the right:
Suitable for installation inside standard temperature sensor junction boxes.
It can also be installed separately in the dashboard as a signal conversion unit.
The product has passed CE certification.
Used for inputting K, E, S, B and other types of thermocouples, and outputting a standard DC current signal of 4-20mA through transmission.
MT2188X-SA two-wire temperature transmitter manufacturer uses a two-wire system (with the loop power supply and signal output using two common wires), and the output current is linear with the measured temperature. The integrated structure is installed inside the standard junction box of the temperature sensor.
Input
Input types: K, E, S, B, T, W, J and other types of thermocouples
Temperature range: (see selection table)
Input impedance: ≥ 20K Ω
Cold end temperature compensation: -15~+75 ℃
Output
Output current: 4~20mA
Output circuit power supply: 12-30VDC
Zui small working voltage: 12VDC
The relationship between load resistance and power supply:
comprehensive parameters
Standard accuracy: ± 0.1% (see selection table)
Cold end compensation error: ± 1 ℃
Temperature drift: Basic error/10 ℃
Load variation impact: ± 0.1% (allowable load range)
Power on response time:<1s (10-90%)
Stable time:<10s
MT1188X lead gauge temperature transmitter wholesale working environment temperature: -20~+70 ℃
Protection level: IP 00/IP 54 (determined by sensor protection level)
Electromagnetic compatibility: meets the relevant requirements of IEC61000 and EN61000
External dimensions (see external dimension diagram): Φ 46 × 20 (mm)
Whole machine weight: approximately 30 grams