Circular pulsating vacuum pressure steam sterilizer (150L) pulsating vacuum sterilizer

Introduction: 1. Main parameters of the product: 1. Sterilizer volume: 0.15M 500 * 800mm; 2. Sterilizer size: length * width * height 1100 * 700 * 1600mm; 3. Sterilization temperature ℃: 105-132 ℃ (1 ℃); 4. Working pressure Mpa: 0.15Mpa~0.20Mpa; 5. Power: 9KW/380V, 50Hz; 6

1、 Main parameters of the product:

1. Sterilizer capacity: 0.15M ³ φ 500 * 800mm;

2. Sterilizer dimensions: length * width * height 1100 * 700 * 1600mm;

3. Sterilization temperature ℃: 105-132 ℃ (± 1 ℃);

4. Working pressure Mpa: 0.15Mpa~0.20Mpa;

5. Power: 9KW/380V, 50Hz;

6. Each pot consumes 6-8 degrees of electricity (type 03, 126 ℃, sterilization time of 30 minutes); Excellent insulation effect (equipment surface temperature<45 ℃, ambient temperature<2 ℃); No wet pack, just dry for 10 minutes;

7. Material: The sterilization chamber, sterilization chamber door, and sealing ring flange are all made of 304 stainless steel;

2、 Technical features:

1. This device applies computer technology and has a built-in sterilization program with variable parameters, achieving automatic control of the entire sterilization process and ensuring sterilization effectiveness;

2. To meet the sterilization requirements of some special items, manual control is set up for sterilization, which is freely controlled by the operator;

3. The sterilization temperature is controlled in real-time and displayed digitally by directly reading data from the sterilization room through sensors, allowing users to intuitively read the temperature and time;

4. The low water level automatic power-off device will give an alarm prompt when the water level is too low;

3、 After sales service:

1. The supplier is responsible for transporting the equipment to the user unit, as well as debugging the machine and providing training on user operation;

2. Warranty: Free three guarantees for one year, lifetime maintenance;

3. Repair response time: within 24 hours;