The cyclic corrosion experimental instrument is equipped with a variable speed flow pump, which avoids the drawbacks of the traditional method of atomizing salt spray through compressed air siphon, which makes it difficult to adjust the uniformity of sedimentation.
1Circulating corrosion experimental instrumentHardware design concept:
1. Adjustable speed flow pump avoids the drawbacks of traditional method of atomizing salt spray through compressed air siphon, which makes it difficult to adjust the uniformity of sedimentation;
2. High resolution full-color 7-inch touch screen, intuitively displaying the operating status of various parameters;
3. The forced automatic defogging system avoids the traditional situation where the salt spray box cover can be opened at any time, causing salt spray to overflow and corrode laboratory and other equipment;
4. 0.85 meter low front design, convenient for testing engineers to access and place test samples;
5. The tilted front edge design inside the box increases the testing area and utilizes the space inside the box;
6. The remote software control system can not only display the set temperature and actual temperature curves inside the box and the compressed air saturator, but also display the set humidity and actual humidity curves inside the box, and can convert the displayed curves into EXCEL file data tables with different sampling intervals.
IICirculating corrosion experimental instrumentSystem software functions:
1. Switch between saturated salt spray with compressed air and dry salt spray with compressed air to meet different salt spray testing needs;
2Automatic blowing time setting; At the end or during the salt spray test, when it is necessary to open the box cover, the equipment will automatically blow out the salt spray inside the box to prevent salt spray from overflowing and corroding other equipment in the laboratory.
3. Temperature and humidity control function; When this function is enabled, the temperature and humidity will be controlled to operate according to the set time requirements.
4. The standard configuration of the compressed air saturator is automatic water addition. And there are multi-level water level sensors to ensure that the compressed air saturator will not overheat the heater without water.
5. Remote networking function; This function can save the testing process data on the computer. There is no limit to the number of days to save.