Cisco AP 1200

Product Parameters

Product Specifications
Product Code: AIR-AP1200 and AIR-MP20B-x-K9
Appearance: Micro PCI
Supported data transmission rates: 1, 2, 5.5, and 11Mbps
Network standard: 802.11b
Uplink: 10/100BaseT adaptive Ethernet
Frequency band: 2.412 to 2.462GHz (FCC)
2.412 to 2.472GHz (ET SI)
2.412 to 2.484GHz (T E L E C)
2.412 to 2.462GHz (M 11)
2.412 to 2.452GHz (Israel)
Network structure type: infrastructure, star topology
Wireless intermediary: Direct Sequence Spread Spectrum (DSSS)
Media Access Protocol: Carrier Sense Multipoint Access with Collision Avoidance (CSMA/CA)
Modulation: DBPSK@1Mbps
DQPSK@2Mbps
CCK@5.5 And 11Mbps
Working channel: ETSI: 13; Israel: 7; North America: 11
TELEC (Japan): 14; MII :11
Non overlapping channels: three
Delay: 1Mbps: 500ns
2Mbps :400ns
5.5Mbps :300ns
11Mbps :140ns
Available transmission power settings: 100mW (20dBm)
50mW(17dBm)
30mW(15dBm)
20mW(13dBm)
5mW(7dBm)
1mW(0dBm)
The maximum power will vary depending on the regulations of different countries, and in China, it will not exceed 10MW
Compliant with regulations:
Standard:
-UL 1950; CSA 22.2 No.950－95;
IEC 60950; EN 60950
Wireless transmission approval:
-FCC Part 15.247; Canada
RSS-139-1 & RSS-210 ; Japan
Telec 33B; Europe
EN-330.328; FCC Bulletin OET-65C and Industry RSS-102
EMI and magnetization coefficient
-FCC Part 15.107 and 15.109 Class B;
ICES-003 Class B (Canada);
CISPR 22 lass B
-AS/NZS 3548 Class B;
VCCI Class B; EN 301.489-1 and -17
other:
-IEEE 802.11 and 802.11b
-Microsoft WHQL
Compliant with SNMP: MIB11 and MIBII
Antenna: Two RP-TNC connectors (antenna is an optional accessory and not included with the package)
Security architecture client authentication: 802.1X support, including LEAP and
EAP-TLS， To obtain mutual authentication and dynamic authentication for each user and session
WEP2 key
Authentication encryption is performed through MAC3 address and standard 802.11 authentication mechanism, supporting both static and dynamic authentication
IEEE 802.11 WEP 40 bit and 128 bit keys
Support WEP enhancement, such as key hashing
(Key for each group) and MIC
Status LED: The three indicators on the top panel can display connection status, operation, error/alarm, firmware upgrade and configuration, network/modem and wireless transmission status
Automatic configuration support: CiscoWorks RME4, CiscoWorks SWIM5, BOOTP, and DHCP6
Remote configuration support: Telnet, HTTP, FTP7, TFTP8, and SNMP
Local configuration: Direct console port (RJ-45 port)
Size: 6.562 inches (16.67 centimeters) wide;
7.232 inches (18.37 centimeters) thick;
1.660 inches (4.22 centimeters) high;
Installing the bracket will increase the height by 0.517 inches (1.31 centimeters)
Weight: 25.6 ounces (724 grams), installing the bracket will increase the weight by 6.4 ounces (181 grams)
Environment: -4 ℃ to 131 ℃ F (-20 ℃ to 55 ℃), 10% to
90% humidity (non condensing)
Input power requirement: 48 VDC+/-10%; 6 W RIMS
Warranty: One year