Communication precision distribution monitoring unit

NegotiableUpdate on 03/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The BCM101 series of communication precision distribution monitoring units is used for monitoring the power parameters of the AC power supply column cabinet in data centers. It measures the voltage, current, energy, harmonics and other electrical parameters of the incoming and feeder branches, as well as the status of all circuit breakers. It has a trip alarm function, and each output circuit has two levels of user adjustable overcurrent alarms to prevent potential power failures. The product is equipped with a 7-inch LCD touch screen and provides Ethernet communication interface for easy access to other systems.

Product Details

Incoming monitoring module

BCM101-M

The incoming monitoring module is used to monitor the grid parameters of one or two AC three-phase incoming circuits,

Can connect feeder monitoring module and switch monitoring module.

accuracy class Active power accuracy of 0.5S level

measurement

1/2 incoming line voltage, zero ground voltage, current, power, power factor, frequency, electrical energy

Demand, extreme value, total harmonic distortion rate, 2-63rd harmonic content, imbalance degree

Voltage peak coefficient, current K coefficient, temperature and other parameters

input

4-channel switch status monitoring and 2-channel alarm output communication

Provide 2 RS485 communication interfaces and optional 1 Ethernet interfaceExtended featuresUp to 6 monitoring modules can be attached

Unit: mm

Feedline monitoring module

BCM101-S

The feeder monitoring module can monitor up to 30 single-phase AC circuit grid parameters, which can be measured through voltage measurements

Directly determine the on/off status of the branch circuit breaker and connect it to the incoming monitoring module through the bus interface.

measurement

Up to 30 feeder lines can be measured for voltage, current, power, frequency, electrical energy, and total harmonic distortion rate of current

Parameters such as 2-31st harmonic content

measurement

Built in dedicated energy metering chip for measurement

monitor

Equipped with branch switch status monitoring and current two-stage threshold alarm function communication

Equipped with a 4-digit dip switch for easy setting of communication addressinstallExternal plug-in CT, equipped with dedicated cables, with each voltage and current corresponding one-to-one, convenient for commutation operation

Switch monitoring module

BCM101-K

The switch monitoring module can monitor up to 60 circuit breaker switches or fault states, using DC24V active

Wet contact connection, connected to the incoming monitoring module through a bus interface.

measurement Up to 60 DC24V active wet contact inputs communication

Equipped with a 4-digit dip switch for easy setting of communication address

Unit: mm

display module

BCM101-HMI

The display module is connected to the incoming monitoring module through the RS485 bus, used for monitoring the electrical parameters of incoming and feeder lines

And the circuit breakerDisplay of measurement information for device status and setting of parameters for each module.

display 7-inch touch screen Settings

The number of monitoring channels for each module can be configured